Biblia Del Lcd Y Plasma

EC Declaration of Conformity
We GOOD WILL INSTRUMENT CO., LTD.
No.7-1, Jhongsing Rd, Tucheng City, Taipei County 236, Taiwan

FUNCTION GENERATOR-SERIES INSTRUCTION MANUAL

GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.
No.69 Lushan Road, Suzhou New District Jiangsu, China. declares that the below mentioned product GFG-8215A, GFG-8216A,GFG-8217A, GFG-8219A, GFG-8250A,GFG-8255A are herewithconfirmed to comply with the requirements set out in the Council Directive on the Approximation of the Law of Member States relating to Electromagnetic Compatibility (89/336/EEC, 92/31/EEC, 93/68/EEC) and Low Voltage Equipment Directive (73/23/EEC, 93/68/EEC). For the evaluation regarding the Electromagnetic Compatibility and Low Voltage Equipment Directive, the following standards were applied:

TABLEOF CONTENTS
1. 2. 3. 4. 5. 6. 7. SAFETY SUMMARY………………………………………. INTRODUCTION…………………………………………… SPECIFICATION……………………………………………. FUNCTION DESCRIPTION.………………………………. USAGE DESCRIPTION……………………………………. APPLICATION NOTE……………………………………… MAINTENANCE…………………………………………… 1 5 7 13 17 23 33

EN 61326-1: Electrical equipment for measurement, control and laboratory use ––
EMC requirements (1997+A1: 1998)Conducted and Radiated Emissions Electrostatic Discharge EN 55011 Group I class A: 1991 EN 61000-4-2: 1994 Current Harmonic Radiated Immunity EN 61000-3-2: 1995 ENV 50140: 1993 Voltage Fluctuation Electrical Fast Transients EN 61000-3-3: 1995 EN 61000-4-4: 1995 Surge Immunity EN 61000-4-5: 1995 Conducted Susceptibility EN 61000-4-6: 1996 Power Frequency Magnetic field EN 61000-4-8: 1993 Voltage Dips/Interrupts EN 61000-4-11: 1994

Low Voltage Equipment Directive 73/23/EEC & amended by 93/68/EEC
Safety Requirements IEC/EN 61010-1:2001

2

FUNCTION GENERATOR-SERIES INSTRUCTION MANUAL

FUNCTION GENERATOR-SERIES INSTRUCTION MANUAL

1.SAFETY TERMS AND SYMBOLS
DANGER High Voltage

Please take a moment to review these safety terms and symbols which may appear in this manual or onEquipment to prevent damage to the Function Generators.
ATTENTION refer to Manual

WARNING. Warning statements identify condition or practices that could result in injury or loss of life. Protective Conductor Terminal

CAUTION. Caution statements identify conditions or practices that could result in damage to this product or other property. (ground) Earth Terminal

Frame or Chassis Terminal

12

FUNCTION GENERATOR-SERIES INSTRUCTION MANUAL

FUNCTION GENERATOR-SERIES INSTRUCTION MANUAL

FOR UNITED KINGDOM ONLY
NOTE: This lead/appliance must only be wired by competent persons WARNING: THIS APPLIANCE MUST BE EARTHED IMPORTANT: The wires in this lead are coloured in accordance with the following code: Green/ Yellow: Earth Blue: Neutral Brown: Live(Phase)

terminal which ismarked with the letter N or coloured Blue or Black. The wire which is coloured Brown must be connected to the terminal marked with the letter L or P or coloured Brown or Red. If in doubt, consult the instructions provided with the equipment or contact the supplier. This cable/appliance should be protected by a suitably rated and approved HBC mains fuse : refer to the rating information on the equipmentand/or user instructions for details. As a guide, cable of 0.75mm² should be protected by a 3A or 5A fuse. Larger conductors would normally require 13A types, depending on the connection method used. Any moulded mains connector that requires removal /replacement must be destroyed by removal of any fuse & fuse carrier and disposed of immediately, as a plug with bared wires is hazardous if aengaged in live socket. Any re-wiring must be carried out in accordance with the information detailed on this label.

As the colours of the wires in main leads may not correspond with the colours marking identified in your plug/appliance, proceed as follows: The wire which is coloured Green & Yellow must be connected to the Earth terminal marked with the letter E or by the earth symbol or coloured...