Camara axis instalación

Solo disponible en BuenasTareas
  • Páginas : 41 (10126 palabras )
  • Descarga(s) : 0
  • Publicado : 28 de enero de 2011
Leer documento completo
Vista previa del texto
AXIS 206/AXIS 206M Megapixel Network Camera
Contents
AXIS 206/206M Network Camera Quick Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . 3 Guide d’installation rapide de la caméra réseau AXIS 206/206M . . . . . . . . . . . . . . . . . . . 9 AXIS 206/206M Netzwerkkamera Schnellinstallation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Guía de instalación rápida de lacámara de red AXIS 206/206M . . . . . . . . . . . . . . . . . . 23 Guida all'installazione rapida della videocamera di rete AXIS 206/206M . . . . . . . . . . . 29

AXIS 206/206M Quick Installation Guide

Page 3

AXIS 206/206M Network Camera Quick Installation Guide
Front
Status indicator (outer ring) Focus ring Control button Power indicator Mounting lock ring

Rear

Serial numberlabel

Power Cable clip Network indicator

Network connector

Power connector

Follow these steps to install the AXIS 206/206M on your local network (LAN): 1. Familiarize yourself with the camera (this page). 2. Connect the camera - see Cable Connections, on page 4. 3. Assign an IP address - see Installation Methods, on page 4. For more information, please see the User’s Manual, which isavailable on the CD included in this package. Updated versions can be obtained from www.axis.com

Package Contents
Item Network Camera Power adapter Camera stand Cable clip CD Printed Materials Notes AXIS 206/206M. The adapter is country-specific. Please check that the adapter is correct for your location. Supplied with 3 mounting screws. The extension section is ready fitted. Fixes to back panelfor holding power cable. Documentation and software. • • AXIS 206/206M Quick Installation Guide Axis Warranty Document

Page 4

AXIS 206/206M Quick Installation Guide

Mounting
1. If required, use the 3 supplied screws to fix the base plate to a flat surface. 2. To use the shorter stand, unscrew the lock ring to release the camera, and remove the extension section. 3. Re-attach thecamera, adjust the angle and gently tighten the lock ring. Important!

Wall mounting

Lock ring

The AXIS 206/206M is designed for indoor use only, and must always be positioned where it is not exposed to direct sunlight or strong halogen light, which can cause permanent damage to the camera’s image sensor. Damage as a result of exposure to strong light is not covered by the Axis warranty.Cable Connections
1. Using the self-adhesive strip, attach the supplied cable clip to the rear panel and fasten the power cable to it. This will prevent accidental cable disconnection. 2. Connect the power adapter to the camera. 3. Connect the AXIS 206/206M to the network using a standard RJ-45 network cable.

Installation Methods
The AXIS 206/206M is designed for installation on an Ethernetnetwork. This involves assigning it an IP address, automatically (via e.g. DHCP) or manually. Several installation methods are available. The one to use depends on how your network is configured. If unsure of the method to use, please consult your network administrator, or see the documentation for your network. • If you are using e.g. a home broadband router, you may find it convenient to view therouter’s administration pages to discover which IP address has been assigned to your AXIS 206/206M. Please consult the router’s documentation for further information. • If your network has an Internet connection (with no HTTP proxy) and uses a DHCP server to assign IP addresses, use the One-Click installation procedure. See page 5. • If your network uses automatic IP addressing (DHCP) and yourcomputer uses the UPnPTM service, the AXIS 206/206M will automatically be detected and displayed on your screen. See page 6 for more information. • Use the AXIS IP Utility (see page 6) to discover the IP address. This can also be used to set the IP addess manually. • Set the IP address manually with the ARP/Ping method, as described on page 7.

AXIS 206/206M Quick Installation Guide

Page 5...
tracking img