Caracteristicas acero naxtra

Solo disponible en BuenasTareas
  • Páginas : 2 (270 palabras )
  • Descarga(s) : 0
  • Publicado : 3 de diciembre de 2010
Leer documento completo
Vista previa del texto
隆英
LEONG JIN

NAXTRA M700
General Information

QUENCHED AND TEMPEPRED SPECIAL STRUCTURAL STEEL PLATE

NAXTRA M700 is a quenched and tempered special structuralsteel, combining high yield strength of at least 700 N/mm2, with outstanding toughness and excellent weldability. The steel has a fine-grained microstructure and fulfillsthe requirement of EN10025 S690QL. In many structures, the use of high strength NAXTRA M700 will make it possible to reduce plate thickness and thus reduce material,processing and operating cost Use for welded construction of pressure vessels, penstocks, highway bridges, steel structures, fans, pumps, lifting equipments and portequipments, mobile cranes, mining equipment, which are utilized in different types of climatic conditions . C ≤ 0.20 Si ≤ 0.80 Mn ≤ 1.60 P ≤ 0.02 S ≤ 0.01 Cr ≤ 1.50 Mo ≤ 0.60Application % Chemical Composition Heat Analysis Mechanical Properties
(Typical values for 20mm plate thickness)

Plate thickness mm ≤ 65 > 65 ≤ 100

Yield StrengthRe N/mm2 min 700 650

Tensile Strength Rm, N/mm2 770 to 940 760 to 930

Elongation A5 % min 14 14

Charpy impact tested at minus 40 degree C min longitudinal 30 Jand transverse 27 J

Available Stock

Plate

• Standard size

Width 2438 2438 2438

Length 6096 9144 12200

Thickness 5 ● 6 ● 8 ● 10 ● ● ● ● ● ● ● ● ● ● ● ● 1214 15 16 20 25 30 35 40 45 50

Page 1 of 1 All dimensions are in mm Standard sizes are subject to change without prior notice Other sizes are also available uponrequest

Address Tel Fax Website Email

: : : : :

No. 11 Benoi Crescent, S629974 +65 62661132 +65 62682090, 62661529 www.leongjin.com.sg sales@leongjin.com.sg

tracking img