Codigo

ROUTER 1
--- System Configuration Dialog --
Continue with configuration dialog? [yes/no]: NO
Router>ENA
Router#CONF T
Enter configuration commands, one per line. Endwith CNTL/Z.
Router(config)#HOSTNAME ROUTER1
ROUTER1(config)#INT FA 0/0
ROUTER1(config-if)#IP ADD 192.168.2.1 255.255.255.0
ROUTER1(config-if)#NO SHUT
%LINK-5-CHANGED: InterfaceFastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ROUTER1(config-if)#EXIT
ROUTER1(config)#INT SER 2/0ROUTER1(config-if)#IP ADD 10.0.0.2 255.0.0.0
ROUTER1(config-if)#CLOCK RATE 64000
ROUTER1(config-if)#NO SHUT
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
ROUTER1(config-if)#EXITROUTER1(config)#IP ROUTE 192.168.3.1 255.255.255.0
% Incomplete command.
ROUTER1(config)#IP ROUTE 192.168.3.1 255.255.255.0 SER 2/0
ROUTER1(config)#^Z
%SYS-5-CONFIG_I: Configuredfrom console by console
ROUTER1#

ROUTER 2
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: NO
Press RETURN to get started!
Router#CONF TEnter configuration commands, one per line. End with CNTL/Z.
Router(config)#HOSTNAME ROUTER2
ROUTER2(config)#INT FA 0/0
ROUTER2(config-if)#IP ADD 192.168.3.1 255.255.255.0ROUTER2(config-if)#NO SHUT
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upROUTER2(config-if)#EXIT
ROUTER2(config)#INT SER 2/0
ROUTER2(config-if)#IP ADD 10.0.0.1 255.0.0.0
ROUTER2(config-if)#NO SHUT
%LINK-5-CHANGED: Interface Serial2/0, changed state to upROUTER2(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
ROUTER2(config-if)#EXIT
ROUTER2(config)#IP ROUTE 192.168.2.0 255.255.255.0 SER 2/0
ROUTER2(config)#