Ejemplo De Examen Cswa Solidworks

L E A R N I N G

SolidWorks 2010

CSWA Exam Preparation

CSWA Exam Practice Questions
Overview
This document contains practice questions that can be used to prepare for the Certified SolidWorks Associate (CSWA) exam. The questions are intended to help you become familiar with the types of questions featured on the CSWA exam. Additional information about the CSWA exam is available on thestudent Web site (www.g-wlearning.com/CAD). There are 0 practice questions in this document. The questions are identified by exam category. Use the questions to assess your modeling skills and knowledge of SolidWorks tools and techniques. In addition, use the questions to measure your ability to work efficiently. The CSWA exam is a timed, online exam that must be completed in 80 minutes (3 hours)or less. Questions related to the Basic Modeling Theory and Drawing Theory exam category and the Advanced Modeling Theory and Analysis exam category are theory-based questions. They should be answered in 0 minutes or less. Questions related to the Part Modeling, Advanced Part Modeling, and Assembly Modeling exam categories are modeling questions. These questions require you to model a part orassembly and should be completed in 45 minutes or less. Use this as a general guideline when working through the practice questions.

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions



L E A R N I N G

SolidWorks 2010

CSWA Exam Preparation

Practice Question 1.
A Pleaseclick toenlarge B Pleaseclick toenlarge C Pleaseclick toenlarge

Part ModelingModel the part shown in the figures provided. Use the following information. •  nit system: MMGS (millimeter, gram, second) U •  ecimal places:  D •  art origin: Arbitrary P •  = 50 A •  = 70 B •  aterial: AISI 1020 M What is the overall mass of the part in grams? A. 878.62 B. 998.54 C. 1098.32 D. 1127.72

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions

Practice Question 1A

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions



Practice Question 1B

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions



Practice Question 1C

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions



L E A R N I N G

SolidWorks 2010

CSWA Exam Preparation

PracticeQuestion 2.
A Pleaseclick toenlarge B Pleaseclick toenlarge C Pleaseclick toenlarge

Part Modeling
Model the part shown in the figures provided. Use the following information. • Unit system: IPS (inch, pound, second) • Decimal places:  • Part origin: Arbitrary • A = .5 • B = .5 • Material: Alloy Steel What is the overall mass of the part in pounds? A. 0.20 B. 0.47 C. 0.98 D. 1.23Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions



Practice Question 2A

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions



Practice Question 2B

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions



Practice Question 2C

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions

L E A R N I N G

SolidWorks 2010

CSWA Exam Preparation

Practice Question 3. Basic Modeling Theory and Drawing Theory
The drawing view shown is an example of which SolidWorks view type? A. detail B. aligned section C. broken D. broken-out section

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions

0

L E A R N I N G

SolidWorks 2010

CSWA ExamPreparation

Practice Question 4. Advanced Modeling Theory and Analysis
To define fixtures in a SimulationXpress study, model _____ are selected. A. faces B. edges C. vertices D. edges or vertices

Copyright by Goodheart-Willcox Co., Inc.

CSWA Exam Practice Questions



L E A R N I N G

SolidWorks 2010

CSWA Exam Preparation

Practice Question 5.
A Pleaseclick toenlarge B...