Godwald

DOCUMENTATION
Schwenkwerk-Typ / Slewing Unit Type:

SW 100 DISK-2 Auftrag - Nr. / Com. - no.: 1131.00182 Werks - Nr. / Serial - no.: 3106

OPERATING INSTRUCTIONS SLEWING UNIT
Class-no. Page-no.

A 16.0105-1 E
C o n t e n t s

1-1

Page-no. 1.0 Data sheet

Class-no.

2.0 2.1 2.1.1 2.1.2

Description and Survey of Features Base unit: Constructional and Functional DescriptionConstructional Description Functional Description

3-1 4-1 4/2-6 5/1-2 7/1-2

A 16.0328 E A 16.0416 E A 16.0403/2-6 E A 16.0805/1-2 E A 16.0595/1-2 E

2.2 2.4

Hydraulic diagram Parts list

2300.8999

3.0 3.1 3.2 3.2.1 3.2.2 3.3 3.3.1 3.3.2 3.4 3.5 3.6

Operating instructions Observation of UVV regulations Putting into operation Initial start-up Daily start-up Operation Information foroperation Manual operation Shut-down Reoperation Transportation 8-1 A 16.0610 E

8-1 8-1

A 16.0610 E A 16.0610 E

9-1 9-1 9-1 9-1 9-1

A 16.0651 E A 16.0651 E A 16.0651 E A 16.0651 E A 16.0651 E

Gottwald Port Technology GmbH Forststr. 16 D-40597 Düsseldorf

Telefon: 0211 / 71 02 3681 Telefax: 0211 / 71 02 3740

OPERATING INSTRUCTIONS SLEWING UNIT
Class-no. Page-no.

A 16.0105-2E
C o n t e n t s

1-2

Page -no. 4.0 4.1 4.1.1 4.1.3 4.1.4 4.2 4.2.1 4.2.2 4.2.3 4.3 4.3.1 4.4 Maintenance and repair Maintenance Oil changes Oil filter Motor Required checks Check oil level Check and adjust pressure Miscellaneous checks Repair General Table of recommended hydraulic oil 10-1

Class -no. A 16.0683-1 E

10-2 10-2 10-2

A 16.0677-2 E A 16.0677-2 E A 16.0677-2 E

10-210-2 10-2

A 16.0677-3 E A 16.0677-3 E A 16.0677-3 E

10-3 11/1-2

A 16.0702 E A 05.1800/1-2 E

5.0 5.1 5.2

Failure - Symptoms - Sources of failures Slewing unit not functioning Slewing unit malfunctioning 12-1 12-1 A 16.0757 E A 16.0757 E

Gottwald Port Technology GmbH Forststr. 16 D-40597 Düsseldorf

Telefon: 0211 / 71 02 3681 Telefax: 0211 / 71 02 3740

Data Sheet / TechnicalData
Order no.: Product: Material-Nr.: Serial no.: Year of construction: Deadweight: 1131.00182 SW 100 DISK-2 2308.0347 3106 2007 2.950 kg (basic unit) 2-point-suspension – 3080 kg 2-point-suspension – 3310 kg Crane lifting capacity SWL: Required crane lifting capacity: Mechanical Data Rotational speed / axle: Torque / axle: 5 / 6 min-1 firmly adjusted 3400 Nm 100.000 kg 100.000 kg Operatinginstructions: A 16.0105

Electric Data Mode of operation: S3 Motor type: 112M-4AX Intermittent service: 40 % Motor power: 3,5 / 4,2 Voltage: 380 – 500 / 440 - 480 Frequency: 50 / 60 Current: three phase Rated current (full load): 7,9 Current consumption: System of protection: Insulation class: max. duty classification: Circuit diagram no.: Plug-in connector: Control voltage: No. of slip rings:Voltage solenoid valve: IP 56 1) F 120/h 2307.9459 ODU – 37pol. 230V – 50 / 60 Hz 30pol.x60A+PE150A 24 V DC

duty cycle kW V Hz A ± 10 %

Hydraulic Data max. service pressure Measuring point MA Measuring point MB Rotational sense right [± 10 bar] 2) 200 Rotational sense left [± 10 bar] 2) 200

Pump type / output: Control block: Hydro motor: Filled oil quality: Oil quantity: Filter type: Filtermesh: Admissible service temperature:

P3DB2006L10 / 8,5 Litre/min NG8 MR 300 HLP 46 32 l Argo β16(c) = 200 Exapor - 5 °C up to + 85 °C

Accessories
-

Crosspiece with double hook no. 32

1)

System of protection ensured only with mounted and closed hood

Author :

15.04.2008 / GK - Meissner

Data Sheet / Technical Data
Dimensions (2-point-suspension)

Author :

15.04.2008 / GK- Meissner

Data Sheet / Technical Data
Dimensions (4-point-suspension)

Author :

15.04.2008 / GK - Meissner

OPERATING INSTRUCTIONS SLEWING UNIT
Class-no. Page-no.

A 16.0328 E
2.0 Description and survey of features

3-1

2.1 2.1.1

Basic unit: Constructional and functional description Constructional description (see parts list, page-no. 7-1) The PEINER Slewing Unit is...