Instalacion De Remoto

Guía de instalación rápida

TE100-S5 TE100-S8
V1

Table of Contents
Español 1. Antes de iniciar 2. Instalación del Hardware 3. LEDs Technical Specifications Troubleshooting 1 1 2 3 4 5

Version 06.30.2010

1. Antes de iniciar

Contenidos del paquete
TE100-S5/TE100-S8 Guía de instalación rápida multilingüe ! Adaptador para corriente (5V DC, 800mA)
! !

Requisitos del sistema
! !Un PC con adaptador de red instalado correctamente Cable de Red Cat.5 o Cat.5e ! La toma de corriente debe estar a 1.82 metros (6 pies) del conmutador ! Inspeccione visualmente el jack de corriente DC para comprobar que está conectado al adaptador de corriente ! Compruebe que existe una correcta regulación de la temperatura y una ventilación adecuada alrededor del conmutador ! No coloqueobjectos pesados encima del conmutador

1

2. Instalación del Hardware
1. Conecte el adaptador de alimentación al TE100-S5/TE100-S8 y luego a una toma de corriente.

2. Conecte un cable de red RJ-45 Cat.5 o Cat.5e del PC a un puerto Ethernet disponible en el TE100-S5/TE100-S8.

2

3. LEDs

Potencia Verde: Está encendido Si no está iluminado: Está apagado

Enlace/ACT Verde (Sólido): Laconexión para el puerto es de 100/200(Half/Full) o 10/20(Half/Full) Verde (parpadeo): L’activité est en fonction Si no está iluminado: Aucune activité n'est détectée

3

Technical Specifications

TE100-S5 Standard IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x Flow Control

TE100-S8

Network Media Data Rates Switch Fabric Topology Interface Filtering Table Buffer Memory PowerConsumption Diagnostic LED Power Adapter Dimension Weight Temperature Humidity Certification

Ethernet: Cat. 5 up to 100m Fast Ethernet: Cat. 5, 5e, 6 up to 100m Ethernet: 10Mbps/20Mbps (Half/Full-Duplex) Fast Ethernet: 100Mbps/200Mbps (Half/Full-Duplex) 1.0Gbps Forwarding Capacity Star 5 10/100Mbps Auto-MDIX RJ-45 ports 2K entries per device 384Kbits per device 2.8 watts (max) Power, Link/ACT 5VDC 800mA external power adapter 100 x 78 x 31mm (3.9 x 3 x 1.2 inches) 128g (4.5oz.) 0° ~ 50° C (32° ~ 122° F) Max. 90% (non-condensing) CE, FCC 154 x 110 x 33mm (6 x 4.3 x 1.3 inches) 225g (8oz.) 512Kbits per device 4.5 watts (max) 8 10/100Mbps Auto-MDIX RJ-45 ports 1.6Gbps Forwarding Capacity

4

Troubleshooting
1. After connecting the Switch to a power outlet, the LEDs do not turn on. 1.Check the connection of the power adapter to the TE100-S5/TE100-S8 and the power outlet. 2. Check that the power outlet is receiving power. 2. After I connect my computers to the Switch, I am unable to share files. 1. Check the LEDs on the Switch. Make sure the Link/ACT LED is on. 2. Check the network cable. The minimum length of the cable is 1.5 meters and the maximum length of the cable is 100meters. 3. Disable any software firewall program. 4. Verify that you have file sharing enabled. Please contact your Operating System support for more information. 3. After I connect my computers to the Switch, I can only get onto the Internet from one computer. The Switch was not designed to share Internet between multiple computers. You need to get an Internet router such as the TW100-S4W1CA. 4.Where is the uplink port located on the Switch? Since all the ports on the Switch are Auto-MDIX, any of the ports can be used as an uplink port. If you still encounter problems or have any questions regarding the TE100-S5/TE100-S8, please contact TRENDnet's Technical Support Department.

5

Limited Warranty TRENDnet warrants its products against defects in material and workmanship, undernormal use and service, for the following lengths of time from the date of purchase. TE100-S5/TE100-S8 - 3 Years Limited Warranty AC/DC Power Adapter, Cooling Fan and Power Supply carry a 1 year limited warranty If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and...