Advanced Hybrid System
This manual was printed with soy based ink.
Please read this manual before connecting the Advanced Hybrid System.
Thank you for purchasing a Panasonic Telephone System.
Model No. Service Unit KX-TA308 / KX-TA616 KX-T7320 KX-T7330 KX-T7350 KX-T7020 KX-T7030 KX-T7033 KX-T7050 KX-T7055KX-T7130 KX-T7340 KX-T7040 KX-TA30860 KX-TA30874 KX-TA30877 KX-TA30891 KX-T30865 KX-T7090 KX-A227 Advanced Hybrid System Proprietary Telephone (12 COs) Proprietary Telephone with LCD (12 COs) Proprietary Telephone (12 COs) Proprietary Telephone (12 COs) Proprietary Telephone with LCD (12 COs) Proprietary Telephone with LCD (12 CO’s) and power failure switch Proprietary Telephone (12 COs) ProprietaryTelephone (3 COs) Proprietary Telephone with LCD (12 COs) DSS Console (32 DSSs, 16 Feature buttons) DSS Console (32 DSSs, 16 Feature buttons) Doorphone/Door Opener Card Expansion Card (up to 8 extension lines for a single line telephone) Expansion Card (up to 3 outside (CO) lines and 8 extension lines) OGM and FAX Detection Card Doorphone Headset Back-up Battery Cable Description
NOTICE: • A Proprietary Telephone is abbreviated as PT. • A Single Line Telephone is abbreviated as SLT. • This Operating Instructions does not show complete model number that indicate the country where your models should be used. The model number of your unit is found on the label affixed to the unit.
MODEL NO. – – – – – – – –
Important InformationSatisfactory performance cannot be guaranteed for each combination of host and subsidiary equipment. ‘Prevention of access by user.’ This equipment is intended to be accessible only by authorized personnel. It must be installed in a locked room or similar environment, so that user access is prevented. Failure to prevent such user access will invalidate any approval given to this equipment.
• Keep the unit away from heating and electrical noise generating devices such as ﬂuorescent lamps, motors and televisions. • This unit should be kept free of dust, moisture, high temperature (more than 40˚C / 104˚F) and vibration, and should not be exposed to direct sunlight. • Never attempt to insert wires, pins, etc. into the vents or other holes of this unit. • Do not use benzine,thinner, or the like, or any abrasive powder to clean the cabinet. Wipe it with a soft cloth.
WARNING THIS UNIT MAY ONLY BE INSTALLED AND SERVED BY QUALIFIED SERVICE PERSONNEL. WHEN A FAILURE OCCURS WHICH RESULTS IN THE INTERNAL PARTS BECOMING ACCESSIBLE, DISCONNECT THE POWER SUPPLY CORD IMMEDIATELY AND RETURN THIS UNIT TO YOUR DEALER. DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING THEPOWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT. THEN RECONNECT THE POWER FIRST. THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR SAFETY REASONS, THIS PLUG MUST ONLY BE CONNECTED TO AN EARTHING CONTACT SOCKET WHICH HAS BEEN INSTALLED ACCORDING TO REGULATIONS. THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE, ENSURE THAT THE SOCKET-OUTLET IS LOCATED/INSTALLED NEAR THE EQUIPMENTAND IS EASILY ACCESSIBLE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
For your future reference
(found on the bottom of the unit)
DATE OF PURCHASE
NAME OF DEALER DEALER’S ADDRESS
Introduction Structure of the Manual
This manual consists of the following sections.
Section 1. Operations
Describes the features and theiroperations. It also provides information about the programming required, conditions and connection references for each feature.
Section 2. Appendix
Provides the Tone/Ring Tone List, LED Indication, Feature Number List and the Telephone Troubleshooting.
Description of the Symbols Mainly Used in this Manual
Additional information and conditions.
The feature or program...
Leer documento completo
Regístrate para leer el documento completo.