manual control philips

Universal Remote Control

SBC RU 220

Instructions for use
Instrucciones de manejo
Manual de utilização
w

Code list
AL
RS
VE
I
UN

Instructions for use

English

You just made a great choice by buying this Philips universal
remote control! It takes the place of 2 separate remote
controls and can operate the most-used functions of almost
any brand of TV and VCR.

Installing the batteries
YourSBC RU 220 needs two 1.5V batteries, type R03, UM4 or
AAA.
Put them in like this:

T i p
• Remember to replace the batteries at least once a year.
• Don’t leave the batteries out for longer than one hour,
otherwise you will need to set-up the SBC RU220 again.

KEYS & FUNCTIONS
Power: to switch TV/VCR on and off.
Mode keys: to select TV or VCR mode.
Mute: to switch the TV sound on and off.
To switchbetween the external inputs of your equipment.
Channel Up/Down: to select next / previous channel.
Volume Up/Down: to control the TV volume.

-

Number Keys: for direct channel selection and other
functions.
To switch To switch to the last selected channel.
SHIFT: to get access to additional functions (press together
with other function keys). Depending on the age of
your equipment, the result isfor example:
SHIFT + P+: increases brightness or menu up function
SHIFT + P-: decreases brightness or menu down function
SHIFT + Volume+: increases colour or menu right function
SHIFT + Volume-: decreases colour or menu left function

2

Try other shift/key combinations on your equipment to
discover which functions are available.
Remember that you can’t get access to additional functions if
thesefunctions were not available on the original remote
control of your equipment!

w

To operate menu control.
To confirm your selection.

VCR
Rewind
Record
Stop
Play
Forward
Pause

SET-UP FOR USE
A d v i c e
Carefully read the complete procedure before starting!

Your equipment is a Philips brand:
1 Press the mode key for the device (TV or VCR) you want
to operate.
Press the power key to test.
–The green indicator LED lights up to confirm transmission

2

C h e c k
Press a few keys to check correct response.

Your equipment is of another brand, or your
equipment is a Philips brand, but not all keys
respond correctly:
1 Press the mode key for the device (TV or VCR) you want
to operate.

2 Look up the brand name of the device you want to
3
4

operate in the code list.
Make sure you choosethe correct code list for your device!
Make sure the device is switched on.
Press and hold keys 1 and 3 simultaneously - for about
three seconds- until the green LED lights up. (Release the
keys: the green LED should stay on)

3

English

Instructions for use

Instructions for use

-

5 Enter your 3-digit code using the number keys, within

English

30 seconds.
– The green LED flashes twice.

C h ec k
That’s it! Press a few keys to check correct response. If
response is not correct, repeat procedure beginning at step 1.

N o t e
- If the LED displays one long flash, the code was not
recognised. Please go back to step 1 and repeat the
procedure, using the next 3-digit code in the list.
- If no key is pressed within 30 seconds, you have to start
again at step 1.

A d v i c e
Carefully readthe complete procedure before starting!

You do not know the brand of your
equipment/you can not find the right code in
the code list » auto search:
1 Press the mode selector key for the device (TV or VCR)
you want to operate.

2 Make sure the device is switched on (if the device is a
VCR, please insert a tape and start playback).

3 Press and hold keys 1 and 3 simultaneously -for about
threeseconds- until the green LED lights up.
(Release the keys: the green LED should stay on)
4 Press the power key to start the search. Make sure that
you keep the remote control pointed at your equipment.
– Each time the green LED flashes, another code is sent.
When the right code is found, the equipment switches off.
Immediately press the power key to stop the search.
If the green LED flashed again...