Manual de secador de anillos

650 Series Programmable Process Controllers

Your GSE distributor is:

User's Guide

R

PART NUMBER: 39-10-31468

650 Series Programmable Process Controllers

R

650 Series Programmable Process Controllers

Revision 3.0 May 1999 Part Number: 39-10-31468

176

User's Guide

175

650 Series Programmable Process Controllers

GSE SCALE SYSTEMS PUBLISHING GROUP The User'sGuide to the 650 Series Programmable Process Controllers
Published by: GSE Scale Systems 23900 Haggerty Road Farmington Hills, MI 48335 U.S.A.

Information in this manual is subject to change without notice due to correction or enhancement and does not represent a commitment on the part of GSE, Inc. The information described in this manual is solely the property of GSE, Inc. No part of thismanual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording and sold for any monetary figure without the express written permission of GSE. This also includes both the software used for computer simulation of GSE hardware and its firmware. Setup files that have not been developed by GSE are neither the property nor theresponsibility of GSE. It is highly recommended that all setup files for the 650 series to be backed on disk in ASCII text form.

Third Edition: May 1999 Part Number: 39-10-31468

174

i

User's Guide

ii

173

650 Series Programmable Process Controllers
Troubleshooting 57-66

W
Weighing increments Weighing systems Weighing units 19 6 13

The 650 series instruments come standard witha number of features which makes it the most versatile and powerful system in its price class. From the rugged load cells to the sophisticated electronics, every effort was made in design and manufacture to provide you with the most accurate and highest quality instrumentation. Your GSE distributor will have done most of the work in setting up your system to suit your application. This user'sguide is intended to be a reference tool for explaining the basic functions of day to day operations. Any questions concerning the programming setup or servicing of this product should be addressed to your GSE distributor. For those who would like more information on installation and program setup, a complete Technical Reference Manual is available through your GSE distributor at a nominal cost. Ifyou have any questions or need assistance after first reading this manual, please contact a GSE customer service representative at the following number.

Your GSE distributor is:

172

iii

User's Guide
P111 P112 P118 P162 P181 P182 P183 P184 P200-P202 P204-P206 P206 P300-P309 P61100 P61104 P61105 P61106 P61107 Password Permanent Mounting Printing 62 45 34, 58 58 44 39-44 44 44 63-65 66 6614,45, 47, 49 57, 61 36 36 36 36 29 22 51

R
Receive Communications RS-232 Communications 52 52

S
Selectable Modes Service SmpSz 14, 18 65 44

T
Table Top Mounting Temp Zero? Time Parameter Time and Date Entering Parameters Viewing Transmit Communications 21 30, 33-34 55-56 55-56 56 55-56 55 51

iv

171

650 Series Programmable Process Controllers K
Keyboard Model 650, 651 Model653, 654 Keys, described Standard Alpha 11 11-12 11, 12 13-16 16-18 GSE SCALE SYSTEMS, INC. 23900 Haggerty Road Farmington Hills, MI 48335 U.S.A. Phone: (248) 471-5880 Fax: (248) 471-5844 Email: sales@gse-inc.com Internet: gse-inc.com Research, Engineering, Manufacturing, Marketing, Sales, Technical Training, Product Support, Product Service

L
Last Zero? Linearization Data Parameters LoadCell Connections 30-33 36 22

M
Model type indication Mounting Table-top Permanent Panel mount Multi-Point Linearization 3 21-28 21 22 21-22 38 GSE CANADA, INC. P.O. Box 3591 617 East Lake Road Airdrie, Alberta CANADA T4B 2B8 Phone: (403) 948-9921 Fax: (403) 948-1449 Email: gse_can@tcel.com Distribution, Sales, Product Service

N
New Zero? Numeric Keyboard 30 11-18

O
Only Zero? Operating...