Msds Cera Parafinica

Paraffin Wax 140oF

Page 1 of 5

------------------------------------------------------------------------------------------------

SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT GENERIC NAME ：140℉ Paraffin wax PRODUCT NUMBER： TWCWAX-2 COMPANY IDENTIFICATION： Xin Hong Chang ( Hong Kong ) International Limited EMERGENCY TELEPHONE / FACSIMILE NUMBERS： +86-724-221 1468SECTION 2. COMPOSITION / INFORMATION INGREDIENTS
PURE SUBSTANCE：>99.0 % Chemical Name：Fully Refined Wax SYNONYM： 140℉Petroleum Wax, 140℉ Fully Refined Waxes, 140℉White wax Chemical Abstract Service Number (CAS Registry No.)： 64742-43-4 Hazards Substance Component（contain %）0 % Composition Comment：－

SECTION 3. HAZARDS IDENTIFICATION
Major Hazard and Response IMMEDIATE HEALTH EFFECTS： Eye Contact：Dust may cause mechanical eye irritation. Contact with hot product will cause burns to the eyes. Skin Contact ：Skin contact with hot material may result in severe burns. Ingestion ：Contact with hot material may cause thermal burns. If swallowed, no significant adverse health effects are anticipated. If swallowed in large quantities, this material can obstruct the intestine. Inhalation ：If thismaterial is heated, fumes may be unpleasant and produce nausea and irritation of the upper respiration tract. Sign and symptoms of exposure： Thermal burns to the eye：may include pain, tearing, reddening, swelling, and impaired vision. Thermal burns to the skin：may include pain or feeling of heat, discoloration, swelling, and blistering. Respiratory irritation：may include coughing and difficultybreathing. ENVIRONMENTAL HAZARDS：This product does not have any components at concentrations above 0.1% which are considered carcinogenic by OSHA, IARC OR NTP, and can be biodegradable material . PHYSICIAN AND CHEMICAL HAZARD：fumes. HAZARD RANKING：Health Hazard—HMIS 0, NFPA 0 . Fire Hazard— HMIS 1, NFPA 1 . Reactivity — HMIS 0, NFPA 0.

1

Paraffin Wax 140oF

Page 2 of 5----------------------------------------------------------------------------------------------SECTION 4. FIRST AID MEASURES
The Rescue Method of Different Exposure Entry Routes ： Inhalation ：Move victim to fresh air. If victim is not breathing, immediately begin rescue breathing and 100% Humidified oxygen should be administered by a qualified individual. Get medical attention immediately. Skin contact ：If burned by hotmaterial , cool skin 15 minutes by quenching with large amounts of cool water. Do not try to peel the solidified material from skin or use solvents or thinner dissolve it . Seek medical attention immediately. For contact with product at ambient temperature, remove contaminated shoes and clothing. Wipe off excess material. Wash exposed skin with soap and water. Eye contact ：If heated materialsplash into eyes, flush eyes immediately with fresh water for 15minutes while holding the eyelids open. Get medical attention immediately. Ingestion ：No specific first aid measure are required because this material is not expected to be harmful if swallowed. Do not induce vomiting. As a precaution, give the person a glass of water or milk to drink and get medical advice. MOST SIGNIFICANT SYMPTOMS ANDHAZARD AFFECTS：no FOR RESCUE PERSONAL AT PROTECTIVE EQUIPMENT：no FOR DOCTOR SUGGEST OR REPRESENT： The use of vegetable oil or mineral oil is recommended for remove of this material from the skin.

SECTION 5. FIRE FIGHTING MEASURES
SUITABLE EXTINGUISHER：Use dry chemical foam, carbon dioxide or water fog. PARTICULAR HAZARDOUS：SPECIAL PROPERTIES：FIRE FIGHTING PROTECTIVE CLOTHING ：

SECTION 6.ACCIDENTAL RELEASE MEASURES
PERSONAL PROTECTIVE：Take proper precaution to ensure your own health and safety before attempting spill control or clean–up. For more specific information, refer to Emergency Overview on page 1. Exposure Controls Personal Protection in Section 8 and Disposal Consideration in Section 13 of this MSDS. 1.Spills may create a slipping hazard 2. Contain spill must be...