Plan

Home
Setup Wizard
The Setup Wizard is a useful and easy utility to help setup the DI-524 to quickly connect to your ISP (Internet Service Provider) with only a few steps required. It will guide you step by step to configure the password, time, and WAN settings of your DI-524. The Setup Wizard is a helpful guide for first time users to the DI-524.
Wireless

 Network ID(SSID) :Network IDis used for identifying the WLAN. Client stations can roam freely over this product and other Access Points that have the same Network ID.
(The factory setting is default)
 Channel :The radio channel number. The permissible channels depend on the Regulatory Domain.
(The factory setting is channel 6)
 Security :This device supports four different types of security for wireless network.Wire Equivalence Protection (WEP) :This is a security feature to secure wireless data transmission. Enable WEP encryption to protect your data while it is transferred from one station to another. Select from 64, or 128-bit WEP encryption. 64-bit WEP requires 10 hexadecimal digits, 128-bit WEP requires 26 hexadecimal digits. Hexadecimal digits consist of numbers (0-9) and alphabet characters(a-f).802.1X (Authenticate with Radius Server) :If the users want to use this security-type.At least,a radius for authentication or WEP for data Encryption. Enter the IP address of Radius server.Then select the encryption bit (64 or 128) and RADIUS Shared Key.
WPA-PSK :Another encryption options for WPA-PSK, TKIP (Temporal Key Integrity Protocol). enter a password in the WPA-PSK field between 8 and 63characters long for ASCII. 64 characters(0~9,a~f) for HEX.
WPA (Authenticate with Radius Server) :The users have to get a access form RADIUS server by performing user authentication. Enter the IP address of Radius server and RADIUS Shared Key.
WPA2-PSK(AES) :Accept WPA2 clients only and Pre-share key (encryption key) must be entered manually. You can input either 32 ASCII characters or 64Hexadecimal digits asPre-share key.
WPA2(AES) :Accept WPA2 clients only and work simultaneously with RADIUS Server. The encryption key is got from RADIUS Server dynamically.
WPA-PSK / WPA2-PSK :Accept WPA1 or WPA2 clients to connect simultaneously and Pre-share key (encryption key) must be entered manually. You can input either 32 ASCII characters or 64 Hexadecimal digits as Pre-share key.
WANSettings
WAN (Wide Area Network) Settings are settings that are used to connect to your ISP (Internet Service Provider). The WAN settings are provided to you by your ISP and often times referred to as "public settings". Please select the appropriate option for your specific ISP.
WAN - Dynamic IP Address
Select this option if your ISP (Internet Service Provider) provides you an IP addressautomatically. Cable modem providers typically use dynamic assignment of IP Address.
Host Name :(optional) The Host Name field is optional but may be required by some Internet Service Providers. The default host name is the model number of the device.
MAC Address :(optional) The MAC (Media Access Control) Address field is required by some Internet Service Providers (ISP). The default MAC address is setto the MAC address of the WAN interface in the device. You can use the " Clone MAC Address" button to automatically copy the MAC address of the Ethernet Card installed in the computer used to configure the device. It is only necessary to fill the field if required by your ISP.
Primary DNS address :(optional) Enter in a Domain Name Server to use. Leave blank to receive a DNS address from your ISP.Secondary DNS address :(optional)
Auto-reconnect :Enable this feature to allow the DI-524 to reconnect to the ISP automatically if the connection is disconnected.
WAN - Static IP Address
If required by your ISP, select this option to configure the device with the static IP Address information. Enter in the IP address, subnet mask, gateway address, and DNS (domain name server) address(es)...