Pony Asteroid Rider

RIDER B 2010
This Production Rider (The “Production Rider”) is attached to be part of the contract (“The Contract”) between PONY ASTEROID (“The Artist”) and KANDAVU (“The Promoter”). The Promoter understands that the “Production Rider” has to be 100% Fulfilled .
Any infringement of the Rider could create the cancellation of the “Artist’s performance.
Contact Info:
U.S.A:
Booking & Media:Lisa Bush, Lisabush10@aol.com
Production & Technical Requirements: Amiel , theavenueofsound@aol.com
Ph: 786.517.4495 The Avenue of Sound Miami, Fl.
------------------------------------------------------------------
GERMANY.
Alexander Stimman 0049 3413194915 Leipzig
** For the Show in Lima-Peru contact:
Rainer Fahrion: 997790977
**We only use scan documents or PDF, no Faxes.
Notice:
WE DONOT USE PEAVEY,MACKIE,BEHRINGER OR ANY LOW END PRODUCTS AND BRANDS.
DBX PRODUCTS ARE WELCOME BUT ONLY THE HIGH END LINE.
1
1. SOUNDCHECK.
IMPORTANT!!!
1- Have the entire PA System checked and ready .
2-All line inputs and mics ready and checked.
3- Minimum of 2 hrs for Soundcheck once step #2 is completed.
2. STAGE. STAGE SIZE
MINIMUM Stage will be 40’ wide X 32’ deep
STAGE RISERSPromoter shall provide the following stage risers and have them available the day of show prior to Artist’s production crew arrival. They should be of sturdy construction and skirted with black masking on
all sides.
Three (3) 7’ X 7’ X 1 risers for GTR Amps and bass (Check Stage Drawn) One (1) 10’ X 8’ X 2’ carpeted drum riser placed upstage center.
CREW
Promoter shall provide for qualifiedsound, light & monitor technicians (unless Artist’s production
is used) to work this engagement in addition to truckloaders, stagehands, deck hands, riggers, electrician and
runners. The number of each will be dependent upon the type of venue, difficulty of load- in/load-out and
with the agreement of Artist’s Production Manager. The minimum to be provided will be: (4) stagehands,
(2) truckloaders,(2) riggers , (1) electrician, (1) runner.
3. BACKLINE. INSTRUMENTS/ AMPLIFICATION
GUITARS:
2 Marshall Heads: JCM800 or JCM900
8 Marshall 4x12 Cabinets: 425A 0r 425B ---------------------------------------------------------------------------------------- BASS:
1 Bass Amp Head or a Bass System, Any of the following options:
Ampeg
Heads :SVT-2Pro, SVT-VR , SVT-CL,SVT PRO,SVT-4PRO
Cabinet:SVT-810E, SVT-610E, Heritage SVT-810E ,Heritage SVT-410HLF,
Marshall
Head: 1992LEM Cabinet: MF280L6
Bass System: MB450H, MB4410 System.
2
Orange:
Orange AD200B Tube BASS Head with Orange OBC 410 Bass Guitar Cabinet
Gallien Krueger:
Head: Fusion 1050, Fusion 550, GK 800RB , GK 1001RB-II Cabinet: Neo 410, Neo 212 II
SWR:
Head: SM 1500TM,SM 900TM,750 XTM Cabinet: Big Ben, Triad
AmpRisers: 3 raisers 7’x7’x1’
(to hold the width of 2 Marshalls 4x12 cabinets and with enough depth for a
musician to be in front of the amp)
Drum Riser: 10’ X 8’ X 2’
Drum Monitor: t obe raised 2FT AMPS
3
4. MONITORS.
**The Promoter will provide a qualified and experienced local Monitor Engineer. Approved by PONY ASTEROID.
1 Monitor Console with minimum 6 Mixes(Monitors) and 2 Sends (forEFFXs)., and EQ in all channels.( No Peavey Mackie)
5 Floor Monitors (EAW, Martin Sound ,Bose)
2 Sidefills
2 Multiprocessors (Reverb, Delays) 3 Compressors DBX 160A
5.FOH.
**Sound Engineer will be provided by the Promoter under Pony Asteroid approval.
Main Amplification: Meyer Sound System or EAW.
Console: Midas Pro 40, Yamaha PBM4000 ** any other console should be approved by the LocalMixing engineer approved by PONY ASTEROID.
Stereo Processors:
1 Stereo Graphic EQ Klark Teknik DN360
1 Stereo Compressort: API 2500,DBX Conpresspr 160 A or Alan Smart C1. 1 Aural Enhancer/Exciter: BBE or Aphex.
Important: No Mackies,Peavey,Soundcraft ,Behringer or any low end mixer or console.
32 Channel Console with min 6 Aux and 8 Busses(Subgroups). Brand: coordinante with Mixing Engineer....