Quimica Sanguinea

User Manual of CS-800 Auto-Chemistry Analyzer

Instruction:
Dear user, thanks for purchasing our CS-800 Auto-Chemistry Analyzer.
Please read the user manual carefully in order to operate the instrument correctly. Incorrect operation
may affect the precision and accuracy of the test results, or endanger personal safety.
Please keep the user manual safely for your any timereference.

Note:
● Instrument should be operated by medical inspection specialist, physician, nurse or lab assistant who
are specially trained.
● Instrument should be controlled by special software. Please install the software that is appointed by
our company. Installation of other software/hardware may interferer normal operation. Don’t operate
other software when instrument operating.● Dust may accumulate on the surface of instrument after long time storage. Soft cloth or gauze can be
used for cleaning work, and a little detergent can be used if necessary. Please cut off the power supply
before cleaning. When instrument is not used, make sure shut the lid down.
● As to the use and storage method of the sample, reagent, Controls, Calibrator, please refer to therelevant instructions.
● Sample, Controls, Calibrator and waster solution have the potential biochemical infectivity. the
detergents are corrosive that may hurt eyes, skin and mucosa. Operator should refer to the safety
regulation for lab operation. Protective measure should be taken to operator (Such as lab protective
clothes and gloves).
● Avoid contact with eyes and skin, in case ofskin contact, flush the area with water, rinse immediately
with plenty of water and seek medical advice.
● Operator should comply with the local regulation when draining and dealing with reagent, waste
solution, waste sample, consumable etc. Please dispose the waste solution and instrument
consumable according to the regulation of medical waste, infective waste and industrial waste.I

User Manual of CS-800 Auto-Chemistry Analyzer

Warning:
●. Instrument should be operated in a good ground condition, and an independent power supply is a
must, the input power should be conformed to instrument requirement.
●. Don’t pull the electrical wire with wet hand, or there is a risk of electrical shock.
●. Don't stamp, twist, drag the wire and cable, or it may causea fire.
●. Please don’t open the back and side cover board before cutting the general power supply except
Dirui special service staff.
●. If liquid occurs in instrument interior or there is an internal pipeline leakage, please immediately cut
off the general power supply, and contact Dirui customer service dept.
● Please don’t touch sample probe, reagent probe and stirring rod,etc. when instrument operating,
don’t put your hand into the opening part, or it may cause body injury or instrument damage.
● Cut off the power supply before replace light source lamp. Don’t touch the lamp before it is cool to
avoid burning.
● Periodic maintenance should be executed strictly according to the user manual. Or it may cause
instrument malfunction, and affect the accuracyand precision of test results.
● Make sure that the Auto-Chemistry Analyzer is operated according to the user manual, or the
measuring result is not a reliable one, and the damage on instrument may endanger human safety.
● Please don’t place combustible material around the instrument.

Note: In kind object for software interface for reference only, without notice in case of
change.II

User Manual of CS-800 Auto-Chemistry Analyzer

Catalogue
Chapter 1

Brief Introduction.............................................................................................................. 1

1.1 Summary ..................................................................................................................................... 1
1.2 Main technical...