Rp90 Digitech
Páginas: 37 (9247 palabras)
Publicado: 13 de octubre de 2011
Procesador de modelado de guitarra
Manual de instrucciones
WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS THE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING LIqUID AND NO ObjECT FILLED WITH LIqUID, SUCH AS vASES, SHALL bE PLACED ON THE APPARATUS. CLEAN ONLY WITH A DRY CLOTH. DO NOT bLOCK ANY OF THEvENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOvES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED bY THE MANUFACTURER. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME. Do not defeat the safety purposeof the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. POWER ON/OFF SWITCH: The Power switch used in this piece of equipment DOES NOT break the connection from the mains. MAINS DISCONNECT: The plugshall remain readily operable. For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated into the electrical installation of the rack or building.
DECLARACION DE CONFORMIDAD
Nombre del fabricante: Dirección del fabricante: declara que el producto: Nombre del producto: Opciones del producto:DigiTech 8760 S. Sandy Parkway Sandy, Utah 84070, USA RP 90 todas (requiere un adaptador de corriente de clase II que cumpla con los requisitos de EN60065, EN60742 o equivalente).
cumple con las siguientes especificaciones de producto: Seguridad: EMC: Información complementaria: El producto citado anteriormente cumple con los requisitos de la Directiva de bajo voltaje 72/23/EEC y con laDirectiva EMC 89/336/EEC tal como quedó modificada por la Directiva 93/68/EEC. Vicepresidente del departamento técnico-MI 8760 S. Sandy Parkway Sandy, Utah 84070, USA Fecha: 27 de agosto de 2007 Contacto en Europa: Su distribuidor o servicio técnico oficial DigiTech o: Harman Music Group 8760 South Sandy Parkway Sandy, Utah 84070 USA Ph: (801) 566-8800 Fax: (801) 568-7583 IEC 60065 (7ª edición 2001) EN55013 (2001 + A1) EN 55020 (1991)
Garantía
En DigiTech® estamos orgullosos de todos nuestros productos y por ello le ofrecemos la siguiente garantía: 1. Debe cumplimentar y enviarnos esta tarjeta de garantía en los diez días siguientes a la compra para que podamos validarla. 2. DigiTech garantiza que este aparato, siempre y cuando sea usado dentro de los EE.UU., está libre de defectos en piezasy mano de obra bajo condiciones normales de uso y mantenimiento. 3. La responsabilidad de DigiTech por esta garantía queda limitada a la reparación o sustitución de las piezas defectuosas que den muestras de avería, suponiendo que el aparato sea devuelto a DigiTech con una AUTORIZACION DE DEVOLUCION, quedando cubiertas todas las piezas y mano de obra durante un periodo de un año. Para conseguir...
Manual de instrucciones
WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS THE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING LIqUID AND NO ObjECT FILLED WITH LIqUID, SUCH AS vASES, SHALL bE PLACED ON THE APPARATUS. CLEAN ONLY WITH A DRY CLOTH. DO NOT bLOCK ANY OF THEvENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOvES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED bY THE MANUFACTURER. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME. Do not defeat the safety purposeof the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. POWER ON/OFF SWITCH: The Power switch used in this piece of equipment DOES NOT break the connection from the mains. MAINS DISCONNECT: The plugshall remain readily operable. For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated into the electrical installation of the rack or building.
DECLARACION DE CONFORMIDAD
Nombre del fabricante: Dirección del fabricante: declara que el producto: Nombre del producto: Opciones del producto:DigiTech 8760 S. Sandy Parkway Sandy, Utah 84070, USA RP 90 todas (requiere un adaptador de corriente de clase II que cumpla con los requisitos de EN60065, EN60742 o equivalente).
cumple con las siguientes especificaciones de producto: Seguridad: EMC: Información complementaria: El producto citado anteriormente cumple con los requisitos de la Directiva de bajo voltaje 72/23/EEC y con laDirectiva EMC 89/336/EEC tal como quedó modificada por la Directiva 93/68/EEC. Vicepresidente del departamento técnico-MI 8760 S. Sandy Parkway Sandy, Utah 84070, USA Fecha: 27 de agosto de 2007 Contacto en Europa: Su distribuidor o servicio técnico oficial DigiTech o: Harman Music Group 8760 South Sandy Parkway Sandy, Utah 84070 USA Ph: (801) 566-8800 Fax: (801) 568-7583 IEC 60065 (7ª edición 2001) EN55013 (2001 + A1) EN 55020 (1991)
Garantía
En DigiTech® estamos orgullosos de todos nuestros productos y por ello le ofrecemos la siguiente garantía: 1. Debe cumplimentar y enviarnos esta tarjeta de garantía en los diez días siguientes a la compra para que podamos validarla. 2. DigiTech garantiza que este aparato, siempre y cuando sea usado dentro de los EE.UU., está libre de defectos en piezasy mano de obra bajo condiciones normales de uso y mantenimiento. 3. La responsabilidad de DigiTech por esta garantía queda limitada a la reparación o sustitución de las piezas defectuosas que den muestras de avería, suponiendo que el aparato sea devuelto a DigiTech con una AUTORIZACION DE DEVOLUCION, quedando cubiertas todas las piezas y mano de obra durante un periodo de un año. Para conseguir...
Leer documento completo
Regístrate para leer el documento completo.