Digitech Rp90 Manual

Procesador de
modelado de guitarra

Manual de
instrucciones

WARNING FOR YOUR PROTECTION
PLEASE READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
THE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING LIqUID
AND NO ObjECT FILLED WITH LIqUID, SUCH AS vASES, SHALL bE PLACED
ON THE APPARATUS.
CLEAN ONLY WITH A DRY CLOTH.
DO NOT bLOCK ANY OFTHE vENTILATION OPENINGS. INSTALL IN ACCORDANCE
WITH THE MANUFACTURER’S INSTRUCTIONS.
DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT
REGISTERS, STOvES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT
PRODUCE HEAT.
ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED bY THE MANUFACTURER.
UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR
LONG PERIODS OF TIME.
Do not defeatthe safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
third prong are provided for your safety. If the provided plug does not fit
your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from beingwalked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.

Refer all servicing to to qualified service personnel.Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
POWER ON/OFF SWITCH: The Power switch used in this piece of equipment
DOES NOT break the connection from themains.
MAINS DISCONNECT: The plug shall remain readily operable. For rack-mount
or installation where plug is not accessible, an all-pole mains switch with a
contact separation of at least 3 mm in each pole shall be incorporated into
the electrical installation of the rack or building.

DECLARACION DE CONFORMIDAD
Nombre del fabricante:
Dirección del fabricante:

DigiTech
8760 S. SandyParkway
Sandy, Utah 84070, USA

declara que el producto:
Nombre del producto:

RP 90

Opciones del producto:

todas (requiere un adaptador de corriente de clase II que cumpla con los
requisitos de EN60065, EN60742 o equivalente).

cumple con las siguientes especificaciones de producto:
Seguridad:

IEC 60065 (7ª edición 2001)

EMC:

EN 55013 (2001 + A1)
EN 55020 (1991)Información complementaria:
El producto citado anteriormente cumple con los requisitos de la Directiva de bajo voltaje 72/23/EEC y con la Directiva EMC
89/336/EEC tal como quedó modificada por la Directiva 93/68/EEC.
Vicepresidente del departamento técnico-MI
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Fecha: 27 de agosto de 2007
Contacto en Europa:

Su distribuidor o servicio técnico oficialDigiTech o:
Harman Music Group
8760 South Sandy Parkway
Sandy, Utah 84070 USA
Ph: (801) 566-8800
Fax: (801) 568-7583

Garantía
En DigiTech® estamos orgullosos de todos nuestros productos y por ello le ofrecemos la siguiente
garantía:
1. Debe cumplimentar y enviarnos esta tarjeta de garantía en los diez días siguientes a la compra para que
podamos validarla.
2. DigiTech garantiza que esteaparato, siempre y cuando sea usado dentro de los EE.UU., está libre de defectos
en piezas y mano de obra bajo condiciones normales de uso y mantenimiento.
3. La responsabilidad de DigiTech por esta garantía queda limitada a la reparación o sustitución de las piezas
defectuosas que den muestras de avería, suponiendo que el aparato sea devuelto a DigiTech con una
AUTORIZACION DE DEVOLUCION,...