Scale setup guide
Setup Guide
Data-Pac Mailing Systems Corp 1217 Bay Road Webster, NY 14580 (585) 787-7072 www.data-pac.com
©2007 Data-Pac All rights reserved. No part of this document may be reproduced ortransmitted in any form or by any means, electronic or mechanical (including photocopying, recording, or by any other information storage retrieval system), without the owners express writtenpermission.
Jason Brown
Page 0
12/2/07
Scale Setup Guide
1) Unpack the unit
Set on a solid stable surface and unpack the units from the shipping box. Save the box.
2) Remove the plattersupport insert by removing the top
PLATTER SUPPORT INSERT
3) Unpack the scale case from the shipping box. Save the box.
Screws and a 2.5 allen to lock scale into case
©2007 Data-Pac Allrights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical (including photocopying, recording, or by any other information storageretrieval system), without the owners express written permission.
Jason Brown
Page 1
12/2/07
4) To install the scale you will have to take apart the case.
Left side or DIB side Rightside or feeder/sealer side
Will have to remove all 4 screws
Backside
Will also have to remove all 9 screws
Bottom side Will also have to remove all 9 screws
©2007 Data-Pac All rightsreserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical (including photocopying, recording, or by any other information storageretrieval system), without the owners express written permission.
Jason Brown
Page 2
12/2/07
5) Now install the scale to the case bottom.
Scale Feet
Screws from the Ziploc bag are forlocking the scale down to the case
Remove
6) With the scale tightened its time to put the case back together.
©2007 Data-Pac All rights reserved. No part of this document may be reproduced or...
Regístrate para leer el documento completo.