Sizing, Selection, And Installation Of Pressure-Relieving Devices In Refineries - Part Ii (Installation)

Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries
Part II—Installation
API RECOMMENDED PRACTICE 520 FIFTH EDITION, AUGUST 2003
--`,,```,,,`````,,``,,````,,`-`-`,,`,,`,`,,`---

Copyright American Petroleum Institute Provided by IHS under license with API No reproduction or networking permitted without license from IHS



Copyright American Petroleum InstituteProvided by IHS under license with API No reproduction or networking permitted without license from IHS


--`,,```,,,`````,,``,,````,,`-`-`,,`,,`,`,,`---


Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries
Part II—Installation
Downstream Segment API RECOMMENDED PRACTICE 520 FIFTH EDITION, AUGUST 2003

--`,,```,,,`````,,``,,````,,`-`-`,,`,,`,`,,`---Copyright American Petroleum Institute Provided by IHS under license with API No reproduction or networking permitted without license from IHS




SPECIAL NOTES
API publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed. API is not undertaking to meet the duties of employers,manufacturers, or suppliers to warn and properly train and equip their employees, and others exposed, concerning health and safety risks and precautions, nor undertaking their obligations under local, state, or federal laws. Information concerning safety and health risks and proper precautions with respect to particular materials and conditions should be obtained from the employer, the manufacturer orsupplier of that material, or the material safety data sheet. Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement ofletters patent. Generally, API standards are reviewed and revised, reafÞrmed, or withdrawn at least every Þve years. Sometimes a one-time extension of up to two years will be added to this review cycle. This publication will no longer be in effect Þve years after its publication date as an operative API standard or, where an extension has been granted, upon republication. Status of the publication canbe ascertained from the API Downstream Segment [telephone (202) 682-8000]. A catalog of API publications and materials is published annually and updated quarterly by API, 1220 L Street, N.W., Washington, D.C. 20005, www.api.org. This document was produced under API standardization procedures that ensure appropriate notiÞcation and participation in the developmental process and is designated as anAPI standard. Questions concerning the interpretation of the content of this standard or comments and questions concerning the procedures under which this standard was developed should be directed in writing to the standardization manager, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C. 20005, standards, api.org. Requests for permission to reproduce or translate all or any partof the material published herein should also be addressed to the general manager. API standards are published to facilitate the broad availability of proven, sound engineering and operating practices. These standards are not intended to obviate the need for applying sound engineering judgment regarding when and where these standards should be utilized. The formulation and publication of APIstandards is not intended in any way to inhibit anyone from using any other practices. Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API...