Walter Device Pre-Installation Checklist
Site Name: Site No:
Address:
City: State: Zip:
Phone:
The location meets the following?
Mounting location has normalroom temperature and is free of excess moisture and heat
Device can be mounted on the wall, 4 ft high, with at least 1 ft clearance on both sides and no obstruction in front
Power andphone plugs are within six feet of the device
Also, it can be moved closer to phone jack
What material is the wall made of? Sheetrock and wood
NOTE: When shipped, the device comes with ascrewdriver, 4 mollies, 4 screws, and a wall mount. Additional tools for drilling or mounting into special material (e.g. concrete, brick,etc) may be needed.
Yes [ ] No [ ]
Yes [ ] No [ ]Yes [ ] No [ ]
________________
Is there a working electrical outlet in your installation location? Yes [ ] No [ ]
Is there a working phone jack in your installation location?If yes, check for dial tone.
Yes [ ] No [ ]
If you cannot make an outgoing phone call or there is no phone plug then you may need to use a wireless device. Go to Step 7
Can you hear adial tone? Yes [ ] No [ ]
Note: Please make sure you are not hearing a DIGITAL phone line. It gives a screeching tone that sounds like a fax machine
If There is No Dial Tone
Ask facilitymanager to provide you with an Analog phone line (sometimes called a Fax line). Otherwise, you may need to use a wireless device. Go to Step 7
Do you need to dial an “AREA CODE” for a localnumber?
Do you need to dial a 9 to get external line? Yes [ ] No [ ]
Yes [ ] No [ ]
WIRELESS DEVICES:
Do you have cell phone reception at the installation location?
NOTE: WalTer Devicesuse T-Mobile cellular service. Yes [ ] No [ ]
LAN DEVICES:
Is there a LAN or DSL internet connection available at the installation location?
If YES, does LAN or DSL require login &...
Regístrate para leer el documento completo.