Velocidad de corte

SINUMERIK 840/840C SINUMERIK 850 SINUMERIK 880/880 GA2 Measuring Cycles Version 20 and higher
Start-up Guide 08.96 Edition

Service Documentation

SINUMERIK 840/840C SINUMERIK 850 SINUMERIK 880/880 GA2 Measuring Cycles Version 20 and higher
Start-up Guide Service Documentation

Valid for:

Control
SINUMERIK 840 SINUMERIK 840C SINUMERIK 850 SINUMERIK 880 SINUMERIK 880 GA2

SoftwareVersion
from SW 01 from SW 01 from SW 04 from SW 04 from SW 01

08.96 Edition

SINUMERIK® documentation
Printing history Brief details of this edition and previous editions are listed below. The status of each edition is shown by the code in the "Remarks" column.

Status code in ”Remarks” column:
A . . . New documentation B . . . Unrevised reprint with new Order No. C . . . Revisededition with new status. If factual changes have been made on a page since the last edition, this is indicated by a new edition coding in the header on that page.

Edition 07.90 10.91 01.93 08.96

Order No. 6ZB5 410-0EM02-0AA0 6ZB5 410-0EM02-0AA1 6FC5 197-0AB60-0BP0 6FC5 197-0AB60-0BP1

Remarks A C C C

Siemens quality for software and training to DIN ISO 9001, Reg. No. 2160-01 Other functionsnot described in this documentation might be executable in the control. This does not, however, represent an obligation to supply such functions with a new control or when servicing. This publication was produced on the Siemens 5800 Office System. The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable fordamages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. We have checked that the contents of this publication agree with the hardware and software described herein. The information given in this publication is reviewed at regular intervals and any corrections that might be necessary are made in the subsequent printings. Suggestionsfor improvement are welcome at all times. Subject to change without prior notice. © Siemens AG 1990, 1991, 1993,1996 All Rights Reserved

Order No. 6FC5 197-0AB60-0BP1 Printed in the Federal Republic of Germany

Preliminary Remarks

Technical Comments

Other functions not described in this documentation might be executable in the control. This does not, however, represent an obligation tosupply such functions with a new control or when servicing.

The symbol shown on the left appears in this documentation whenever the machine tool manufacturer has the possibility of influencing/modifying the functional behaviour described by changing a cycle machine data (MDC).

Since the cycle machine data range and the cycle setting data range can be set up in different ways, the relevantdata in the examples are explained on the basis of the standard settings.

This User's Guide applies to: SINUMERIK 850/880 control as from Software Version 4, SINUMERIK 880 GA2 as from Software Version 1, SINUMERIK 840 as from Software Version 1, SINUMERIK 840C as from Software Version 1, measuring cycles as from version 20!

General Preconditions

1

Hardware

2

Functional Test

3Machine Data for Measuring Cycles

4

Setting Data for Measuring Cycles

5

Auxiliary Cycles for Start-up

6

Start-up Flowchart

7

User Memory Submodule (UMS) Tool and Workpiece Measurement in JOG Mode (SINUMERIK 880) Workpiece Measurement in JOG Mode (SINUMERIK 840 SW2)

8

9

10

Lists

11

Alarms

12

Abbreviations

13

Contents

Page 1 1.1 GeneralPreconditions .................................. ........... 1–1 1–2

Notes to ensure smooth running of the measuring cycles

2 2.1 2.1.1 2.1.2 2.1.3 2.2

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Probe ............................................. Multidirectional probe (3D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....