Endomeg

Installing In-Sight® 5000 Series Vision Sensors

Copyright, Trademarks, Patents
The software described in this document is furnished under license, and may be used or copied only in accordance with the terms of such license and with the inclusion of the copyright notice shown on this page. The software, this document, nor any copies thereof may be provided to or otherwise made available toanyone other than the licensee. Title to and ownership of this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation. Cognex Corporation makes no warranties, either express or implied, regarding the described software, its merchantability or its fitnessfor any particular purpose. The information in this document is subject to change without notice and should not be construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or the associated software. This document may not be copied in whole or in part, nor transferred to any other media or language, withoutthe written permission of Cognex Corporation. Cognex P/N 597-0027-04 Copyright © 2003-2006 Cognex Corporation. All Rights Reserved. The hardware and portions of the software described in this document may be covered by one or more of the following U.S. patents (other U.S. and foreign patents are pending): Hardware Vision Tools 4,972,359; 5,526,050; 5,657,403; 5,793,899 5,495,537; 5,548,326;5,583,954; 5,602,937; 5,640,200; 5,717,785; 5,742,037; 5,751,853;5,768,443; 5,796,868; 5,818,443; 5,825,483; 5,825,913; 5,845,007; 5,859,466; 5,872,870;5,909,504

The following are registered trademarks of Cognex Corporation: Cognex Cognex, Vision for Industry In-Sight "crosshair" logo In-Sight The following are trademarks of Cognex Corporation: The Cognex logo Other product and company names mentionedherein are the trademarks, or registered trademarks, of their respective owners.

i

Regulations/Comformity

Regulations/Comformity
Declaration of Conformity Manufacturer: Cognex Corporation One Vision Drive Natick, MA 01760 USA -marked Machine Vision System Product In-Sight 5000: P/N 800-5840-4; P/N 800-5840-4R (RoHS Compliant) In-Sight 5100/5110: P/N 800-5870-1; P/N 800-5870-1R (RoHSCompliant) In-Sight 5400/5410: P/N 800-5855-1; P/N 800-5855-1R (RoHS Compliant) In-Sight 5400S/5410S: P/N 800-5855-3; P/N 800-5855-3R (RoHS Compliant) In-Sight 5400C: P/N 800-5837-4; P/N 800-5837-4R (RoHS Compliant) In-Sight 5400CS: P/N 800-5837-6; P/N 800-5837-6R (RoHS Compliant) In-Sight 5401/5411: P/N 800-5838-4; P/N 800-5838-4R (RoHS Compliant) 89/336/EEC Electromagnetic Compatibility DirectiveEN 55011:1998 + A1:1999 + A2:2002 Class A EN 61000-3-2:2000 + A2:2005 EN 61000-3-3:1995 +A1:2001 EN 61000-6-2:2001

Declares this Product Number:

Complies With: Compliance Standards

European Representative: Cognex France Immeuble le Patio 104 avenue Albert 1er 92563 Rueil Malmaison France Safety UL and CUL Certification marks are present on products LISTED FCC FCC Part 15, Class A Thisdevice complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residental area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

ii

Installing In-Sight® 5000 Series Vision Sensors

Declaration of Conformity Manufacturer: Cognex Corporation One Vision Drive Natick, MA...