Gas Lift

Recommended Practice for
Repair, Testing, and
Setting Gas Lift Valves

API RECOMMENDED PRACTICE 11V7
SECOND EDITION, JUNE 1999

Recommended Practice for
Repair, Testing, and
Setting Gas Lift Valves

Upstream Segment
API RECOMMENDED PRACTICE 11V7
SECOND EDITION, JUNE 1999

SPECIAL NOTES
API publications necessarily address problems of a general nature. With respect to particularcircumstances, local, state, and federal laws and regulations should be reviewed.
API is not undertaking to meet the duties of employers, manufacturers, or suppliers to
warn and properly train and equip their employees, and others exposed, concerning health
and safety risks and precautions, nor undertaking their obligations under local, state, or federal laws.
Information concerning safetyand health risks and proper precautions with respect to particular materials and conditions should be obtained from the employer, the manufacturer or
supplier of that material, or the material safety data sheet.
Nothing contained in any API publication is to be construed as granting any right, by
implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or productcovered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters patent.
Generally, API standards are reviewed and revised, reafÞrmed, or withdrawn at least every
Þve years. Sometimes a one-time extension of up to two years will be added to this review
cycle. This publication will no longer be in effect Þveyears after its publication date as an
operative API standard or, where an extension has been granted, upon republication. Status
of the publication can be ascertained from the API Upstream Segment [telephone (202) 6828000]. A catalog of API publications and materials is published annually and updated quarterly by API, 1220 L Street, N.W., Washington, D.C. 20005.
This document was producedunder API standardization procedures that ensure appropriate notiÞcation and participation in the developmental process and is designated as an API
standard. Questions concerning the interpretation of the content of this standard or comments and questions concerning the procedures under which this standard was developed
should be directed in writing to the general manager of the Upstream Segment,American
Petroleum Institute, 1220 L Street, N.W., Washington, D.C. 20005. Requests for permission
to reproduce or translate all or any part of the material published herein should also be
addressed to the general manager.
API standards are published to facilitate the broad availability of proven, sound engineering and operating practices. These standards are not intended to obviate the needfor applying sound engineering judgment regarding when and where these standards should be
utilized. The formulation and publication of API standards is not intended in any way to
inhibit anyone from using any other practices.
Any manufacturer marking equipment or materials in conformance with the marking
requirements of an API standard is solely responsible for complying with all the applicablerequirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API standard.

All rights reserved. No part of this work may be reproduced, stored in a retrieval system, or
transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise,
without prior written permission from the publisher. Contactthe Publisher,
API Publishing Services, 1220 L Street, N.W., Washington, D.C. 20005.
Copyright © 1999 American Petroleum Institute

FOREWORD
a. This speciÞcation is under the jurisdiction of the API Subcommittee on Standardization
of Field Operative Equipment.
b. American Petroleum Institute (API) Recommended Practices are published to facilitate
the broad availability of proven, sound...