Comando pjl para impresora

Solo disponible en BuenasTareas
  • Páginas : 6 (1394 palabras )
  • Descarga(s) : 0
  • Publicado : 16 de agosto de 2012
Leer documento completo
Vista previa del texto
HP LASERJET PRINTERS - COMMON PJL COMMANDS FOR FRONT PANEL SETTINGS AND DEFAULT PAGE FORMATTING
In this document: Copies Line termination Manual feed Paper size Orientation Formlines Symbol set Font number Pitch size Point size Dark Courier EconoMode Autocont Density Resolution Resolution enhancement Job offset (HP LaserJet 4Si and 4Si MX printers) Outbin (HP LaserJet 4Si and 4Si MX printers)Duplex (HP LaserJet 4 Plus, 4M Plus, 4Si, 4Si MX, 5Si, and 5Si MX printers)) Duplex binding (HP LaserJet 4 Plus, 4M Plus, 4Si, 4Si MX, 5Si, and 5Si MX printers Ready message display Reset Additional commands for the HP LaserJet 5P and 6P family printers) Printer name definition Printing self-test pages Memory booster technology

SECURITY: Public ___________________________________________________QUESTION: What are the PJL commands for HP LaserJet printers? ANSWER: PJL commands are commonly used to change default menu settings for the HP LaserJet 4 and above printer families. The command used is the default command, which permanently changes the default menu setting. For the common PJL commands, please see the Details section. DETAILS: The common PJL commands are found in the followingsections. The following are PJL commands commonly used to change default menu settings for the HP LaserJet 4 and above printer family. The command used is the default command, which permanently changes the default menu setting. NOTE: Not all commands are supported on all HP LaserJet printers, and some commands are Read Only. For a complete listing of PJL commands, see the Printer Job LanguageReference Manual, which is part of the Technical Reference Manual bundle. NOTE: HP LaserJet 4L, 5L, 6L, and 1100 printers will be reset to factory defaults if they are manually reset or unplugged. To change default settings for the current job only, replace Default with the Set command. To enter the escape sequence (Ec), press CTRL then P. No character will appear on the screen at this point. Let up onboth keys and press ESC. A Left Arrow will be displayed on the screen.

Copies
Ec%-12345X@PJL DEFAULT COPIES=1 to 999 Ec%-12345X

Line termination
The following command permanently changes the default menu for line termination. Ec%-12345X@PJL DEFAULT LPARM : PCL LINETERMINATION = 2 Ec%-12345X 0: CR+CR, LF=LF, FF=FF (factory default) 1: CR replaced by CR-LF, LF=LF, FF=FF 2: CR=CR, LFreplaced by CR-LF, FF replaced by CR-FF 3: CR replaced by CR-LF, LF replaced by CR-LF, FF replaced by CR-FF CR = Carriage Return, LF = Line Feed, FF = Form Feed

Manual feed

Ec%-12345X@PJL DEFAULT MANUALFEED=ON or OFF Ec%-12345X

Paper size
The following command permanently changes the default menu setting of the HP LaserJet 4, 5, and 6 printer families to legal-sized paper. Ec%-12345X@PJLDEFAULT PAPER=LEGAL Ec%-12345X NOTE: Variables for paper size are Letter, Legal, Executive, Ledger, Com10, B4, B5, Custom, JISB4, JISB5, JPost, JPostD, A3, A4, C5, DL, and Monarch. Not all paper sizes work on all printers. Check the User's Manual for supported paper sizes.

Orientation
The following command permanently changes the default menu setting of the HP LaserJet 4, 5, and 6 printer familiesto Landscape Orientation. Ec%-12345X@PJL DEFAULT ORIENTATION=LANDSCAPE Ec%-12345X

Formlines
The following command permanently changes the front menu panel of the HP LaserJet 4, 5, and 6 printer families to 66 lines-per-page. Ec%-12345X@PJL DEFAULT FORMLINES=66 Ec%-12345X NOTE: Variables are from 5 lines to 128 lines.

Symbol set
The following command permanently changes the default menusetting of the HP LaserJet 4, 5, and 6 printer families to the PC-8 symbol set. Ec%-12345X@PJL DEFAULT LPARM : PCL SYMSET=PC8 Ec%-12345X

Font number
The following command permanently changes the default menu setting of the HP LaserJet 4, 5, and 6 printer families to font number 2. Ec%-12345X@PJL DEFAULT LPARM : PCL FONTNUMBER=2 Ec%-12345X

Pitch size

The following command permanently...
tracking img