Diagrama de tv

Self Diagnosis

Supported model

SERVICE MANUAL
MODEL NAME REMOTE COMMANDER DESTINATION

BA-6 CHASSIS
CHASSIS NO.

KV-20FS100 KV-20FS100 KV-20FV300 KV-20FV300 KV-21FM100 KV-21FM100KV-21FS100 KV-21FS100 KV-21FV300 KV-21FV300 KV-24FV300 KV-24FV300 KV-25FV300 KV-25FV300

RM-Y173 RM-Y173 RM-Y180 RM-Y180 RM-Y172 RM-Y172 RM-Y173 RM-Y173 RM-Y180 RM-Y180 RM-Y180 RM-Y180 RM-Y180 RM-Y180

USCND US CND LATIN NORTH LATIN SOUTH LATIN NORTH LATIN SOUTH LATIN SOUTH LATIN NORTH US CND LATIN NORTH LATIN SOUTH

SCC-S61A-A SCC-S59A-A SCC-S61B-A SCC-S59B-A SCC-S60E-A SCC-S60F-A SCC-S60A-ASCC-S60B-A SCC-S60D-A SCC-S60C-A SCC-S61C-A SCC-S59C-A SCC-S60G-A SCC-S60H-A

KV-24FV300

RM-Y180

TRINITRON® COLOR TELEVISION
9-965-922-02

KV-20FS100/20FV300/21FM100/21FS100/21FV300/24FV300/25FV300

2-5. METHOD OF SETTING THE SERVICE ADJUSTMENT MODE SERVICE MODE PROCEDURE
1. Standby mode (power off). 2. Press Display Channel 5 Sound Volume + Power on the Remote Commander (press eachbutton within a second).

SERVICE ADJUSTMENT MODE ON
1. The CRT displays the time being adjusted.
Category Display Item Display Item

Mode

service Signal Type ntsc

defl

hsiz

16

vchp00000000

00000000

2. Press 1 or 4 on the Remote Commander to select the time. 3. Press 3 or 6 on the Remote Commander to change the data. 4. Press MUTING then ENTER to save into the memory.SERVICE ADJUSTMENT MODE MEMORY
Turn the set off then on to exit Service Adjustment Mode.
Mode Category service Signal Type ntsc vchp 00000000 defl Display Item Item Data hsiz 16 write 00000000ENTER Red MUTING Green

2-6. WHITE BALANCE ADJUSTMENTS
1. Input an entire white signal with burst. 2. Set to Service Adjustment Mode. 3. Set the PICTURE and BRIGHTNESS to minimum. 4. Adjust with SBRTif necessary. 5. Select GCUT and BCUT with 1 and 4 . 6. Adjust with 3 and 6 for the best white balance. 7. Set the PICTURE and BRIGHTNESS to maximum. 8. Select GDRV and BDRV with 1 and 4 . 9. Adjust...