Diodos Rectificadores
SEMICONDUCTOR TECHNICAL DATA
Order this document by 1N4001/D
Axial Lead Standard Recovery Rectifiers
This data sheet provides information on subminiature size, axial lead mountedrectifiers for general–purpose low–power applications. Mechanical Characteristics • Case: Epoxy, Molded • Weight: 0.4 gram (approximately) • Finish: All External Surfaces Corrosion Resistant andTerminal Leads are Readily Solderable • Lead and Mounting Surface Temperature for Soldering Purposes: 220°C Max. for 10 Seconds, 1/16″ from case • Shipped in plastic bags, 1000 per bag. • Available Tape andReeled, 5000 per reel, by adding a “RL” suffix to the part number • Polarity: Cathode Indicated by Polarity Band • Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
1N4001 thru1N4007
1N4004 and 1N4007 are Motorola Preferred Devices
LEAD MOUNTED RECTIFIERS 50–1000 VOLTS DIFFUSED JUNCTION
CASE 59–03 DO–41
MAXIMUM RATINGS
Rating *Peak Repetitive Reverse Voltage WorkingPeak Reverse Voltage DC Blocking Voltage *Non–Repetitive Peak Reverse Voltage (halfwave, single phase, 60 Hz) *RMS Reverse Voltage *Average Rectified Forward Current (single phase, resistive load, 60Hz, see Figure 8, TA = 75°C) *Non–Repetitive Peak Surge Current (surge applied at rated load conditions, see Figure 2) Operating and Storage Junction Temperature Range Symbol VRRM VRWM VR VRSM VR(RMS)IO 1N4001 50 1N4002 100 1N4003 200 1N4004 400 1N4005 600 1N4006 800 1N4007 1000 Unit Volts
60 35
120 70
240 140
480 280 1.0
720 420
1000 560
1200 700
Volts Volts Amp
IFSM30 (for 1 cycle)
Amp
TJ Tstg
– 65 to +175
°C
ELECTRICAL CHARACTERISTICS*
Rating Maximum Instantaneous Forward Voltage Drop (iF = 1.0 Amp, TJ = 25°C) Figure 1 Maximum Full–CycleAverage Forward Voltage Drop (IO = 1.0 Amp, TL = 75°C, 1 inch leads) Maximum Reverse Current (rated dc voltage) (TJ = 25°C) (TJ = 100°C) Maximum Full–Cycle Average Reverse Current (IO = 1.0 Amp, TL =...
Regístrate para leer el documento completo.