Equipos de perforación top hammer

Technical Specification 09515-1 2009-02-02

Sandvik DP1500 Surface Top Hammer Drills

Sandvik DP1500 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin and a rod changer. DP1500 is designed for efficient production drilling in large quarries or open pit mines and construction work sites. It suits well also for wall control and developmentworks. To customize the rig it can be equipped with a variety of options to meet special requirements.

Hole Diameter: Rock Tools: Rock Drill: Engine Output: Flushing Air: Production Capacity: Total Weight

89 - 150 mm (3 ½” - 6”) 51 and 60 mm ( 2” and 2 3/8” ) rods 28 kW 261 kW 14 m3/min, up to 10 bar 2,0 Mt/year 19 200 kg

© 2009 Sandvik Mining and Construction

1/4

TechnicalSpecification 09515-1 2009-02-02

Sandvik DP1500
POWERPACK
Engine type Number of cylinders Engine output Transmission type Hydraulic pumps Screw compressor type Flushing Air capacity Flushing air pressure Air cleaner Fuel tank Weight Caterpillar C 11 6 261 kW/2 100 rpm Gear box 2 Variable/gear Enduro 25 14 m3/min up to 10 bar 2 pcs, dry type with ejector and safety element 520 l 1 450 kg HL 1560T 51,60 mm 76, 87 mm 90 - 180 bar 30 - 40 Hz 28 kW 2 050 Nm Air / oil mist Air 470 kg

HYDRAULIC ROCK DRILL
Rock drill type Drill rod diameters Drill tube diameters Operating pressure Percussion rate Percussion output power Maximum rotation torque Shank lubrication Flushing Weight

FEED
Feed type Length of feed Rock drill travel Max. length of starter rod Feed/pull out force Retainingcentralizer Feed extension travel Feed swing Feed tilt Weight * W/o hose reel LF 1514, cylinder 8 025 mm 5 580 mm* 6 100 mm (20')* 36 kN Pito 15H 1 480 mm -56/+52° (-20/+94°) 11 - 133° 1 360 kg

HYDRAULIC SYSTEM
Filtration rate Cooling capacity Hydraulic oil tank Shank lubrication device 12 micron abs. up to +50°C ambient 420 l SLU 18-1

CONTROL SYSTEM
Type Collaring system Antijamming system VoltageTHC pro RockPilot Standard Hydraulic / electric 24 VDC

ROD CHANGER
Rod changer type Storage capacity (51 mm) Rod length Max. hole length (51 mm) Weight without rods RC 1514 7+1 rods 3 660, 4 270 mm 35 m (7x14’ + 1x20’) 500 kg

DUST COLLECTOR
Dust collector type Capacity/vacuum Filter elements/material Total filter surface Hydraulic motor output Primary cyclone Movable suction head Weight DC1550 35 m3/min at 1200 mm vacuum H2O 20 pcs/fiber 16 m2 18 kW PE 80 PE 100 S 290 kg

BOOM
Boom type Boom extension Boom lift Boom swing Drilling coverage on flat Collaring height Horizontal holes ZB 1550 H, telescopic 500 mm +50/-17° -2/+27° 1.6 m2 +1.15 /-3.5 m To the right

CABIN
Cabin type Certificates Controls Noise level in the cabin Heaters Pressurization Seat Vibration dampeningWindows Ergo Pro F.O.P.S. and R.O.P.S. Drilling and tramming 80 dB (A) Standard Standard Ergonomic, adjustable Standard Safety laminated, tinted, with wiper

CARRIER
Carrier type Track size Grouser plate width Ground contact length Ground pressure Ground clearance Oscillation angles Tramming force Tramming speed Track mounted FL 6 310 mm 2 520 mm 1.2 kg/cm2 400 mm +/- 11° 140 kN 1.7/3.5 km/h

©2009 Sandvik Mining and Construction

2/4

Technical Specification 09515-1 2009-02-02

Sandvik DP1500
THE JAWS FOR DRILL STEELS
Drill steel type Rods / MF rods MF-rods Pilot tube Pilot tube Tubes Tubes Drill steel diameter 51 mm, 2" 60 mm, 2 3 /8 " 76 mm, 3" 87 mm, 3 ½" 76 mm, 3” 87 mm, 3 ½" Recommended hole diameter 89 - 127 mm 3 ½" - 5" 102 - 140 mm 4" - 5 ½" 89 - 127 mm 3 ½" - 5" 102 -140 mm 4" - 5 ½" 89 - 140 mm 3 ½" - 5 ½" 102 - 152 mm 4" - 6" HL 1560T, hydraulic LF 1514 RC 1514 ZB 1550 H, telescopic FL 6, oscillating Diesel driven, hydraulic pumps and on board compressor Load sensing and open center THC Pro with Rock Pilot Ergo Pro DC 1520 H, hydraulic 8 pcs For rock drill accumulators Service and spare parts manuals: 1 x paper copy 1 x CD-ROM (ToolMan)

STANDARD...