Eswitching basic switchingwireless pt practice sba

ESwitching Basic Switching/Wireless PT Practice SBA
A few things to keep in mind while completing this activity:
1. Do not use the browser Back button or close or reload any Exam windows duringthe exam.
2. Do not close Packet Tracer when you are done. It will close automatically.
3. Click the Submit Assessment button to submit your work.
Introduction
In this practice Packet TracerSkills Exam, you will:
* configure VLANs using VTP
* configure inter-VLAN routing
* modify STP
* configure port security
* add a wireless LAN
Addressing Table
Device |Interface | Address | Subnet Mask | Default Gateway |
Router1 | Fa0/0.10 | 172.16.10.1 | 255.255.255.0 | n/a |
| Fa0/0.20 | 172.16.20.1 | 255.255.255.0 | n/a |
| Fa0/0.43 | 172.16.43.1 | 255.255.255.0| n/a |
| Fa0/0.67 | 172.16.67.1 | 255.255.255.0 | n/a |
WRS | Internet | 172.16.67.10 | 255.255.255.0 | 172.16.67.1 |
| Wireless | 172.16.100.1 | 255.255.255.0 | n/a |
SW_DS1 | VLAN 43 |172.16.43.11 | 255.255.255.0 | 172.16.43.1 |
SW_AC2 | VLAN 43 | 172.16.43.12 | 255.255.255.0 | 172.16.43.1 |
SW_AC3 | VLAN 43 | 172.16.43.13 | 255.255.255.0 | 172.16.43.1 |
PC1 | NIC |172.16.10.10 | 255.255.255.0 | 172.16.10.1 |
PC2 | NIC | 172.16.20.10 | 255.255.255.0 | 172.16.20.1 |
PC3 | NIC | 172.16.10.11 | 255.255.255.0 | 172.16.10.1 |
PC4 | NIC | DHCP assigned | 255.255.255.0 |172.16.100.1 |
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
Step 1: Connect the Devices.
Use the appropriate cable type to make the followingconnections:
* SW_AC2 FastEthernet 0/1 to PC1
* SW_AC2 FastEthernet 0/11 to PC2
* SW_AC2 FastEthernet 0/19 to SW_AC3 FastEthernet 0/19
* SW_AC2 FastEthernet 0/20 to SW_AC3 FastEthernet 0/20* SW_AC3 FastEthernet 0/18 to WRS
Step 2: Configure the Device Basics.
a.       Configure the following on SW_AC2.
         The switch name is SW_AC2.
         The privileged EXEC mode...