Ingles

HMI1200 FOLLOW SPOT.
THANK YOU FOR CHOOSING THIS LIGHT. FOR YOU OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOU INITIAL STAR- UP.
A.PRODUCT INTRODUCTION:
THIS FOLLOW SPOT USES THEGOOD QUALITY MATERIAL OF ALUMINUM AND FERRIC CARDBIDE, AND ADOPTS THE LATEST OUTLINE DESIGN AND OPTICAL SISTEM. BECAUSE OF TWO STRONG FANS. IT CAN BE COOLED OFF SOON, SO THAT THE BRIGHTNESS IS HIGH.ADVANCED ELECTRONIC WAY FINE MINI STEP-MOTOR CAN CHANGE THE COLOR, IRIS, FLASH, DINMER AND COLOR TEMPERATURE, THE FOCUS CAN BE ADJUSTED, SO WE CAN USE THE LIGHT EASILY. THIS LIGHT USES THE INTERNATIONAL512 SIGNAL. IT CAN BE USED SINGLE OR MULTI-LIGHTS. WE CAN USE INSIDE OR OUSIDE CONTROLLER TO SET UP THE MASTER AND SLAVE FREELY. IT HAS TWO COLOR FILTERS WHICH CAN PRODUCE FOUR COLORS, ALSO HAS TWOCOLOR TEMPERATURE FILTERS (3200K, 6000K) WITH THE FUNCTION OF FLASH, DIMMER AND ADJUSTMENT OF FOCUS AND IRIS.

B. USING EXPLANACION:
PLEASE CHECK IF THERE IS DAMAGE BECAUSE OF TRANSPORTATION, FOREXAMPLE IF THE SCREW IS LOOSED, IF THE LEN IS BROKEN, AFTER YOU OPEN THE PACKAGE. IF EVERTHING IS FINE, PLEASE CHOOSE S SUITABLE PLACE TO INSTALL THE STAND, ADJUST THE ANGLE, AND CONNECT THE POWER WITHGROUND LINE, AND THEN THE LIGHT IS ON. THEREFORE, YOU JUS CAN OPERATE THE LIGHT ACCORDING TO THE KEYS OF CONTROLLER AFTER THE 40 SECONDS SELF-DETECTION.
VERSICOLOUR: COLOR TEMPERATURE SWITCH. 0;FORMAL; 1:3200K; 11:6000K;
COLOUR /WHITE: COLOR TEMPERATURE CONTROL SWITCH, SWITCH BETWEEN RAINBOW EFFECT AND MANUAL;
STROBE/LIGHT CHANGE: SWITCH OF FLASH AND DIMMER;
APERATURE MAX / MIN: IRIS SWITCH;TURN ON LIGHT / TURN OFF LIGHT: DIMMER SWITCH;
STROBE (MIDDLE SPIDER): FLASH SPIDER,
APERTURE: IRIS SPIDER;
ECENES RUN/SCENES SAVE: CONTROL OF SCENES
COLOUR PALEITE: COLOR SPIDER;
CAST COLOUR:CONTROL DIFFERENT COLOR

C. TECHNIQUE PARAMETER:
VOLTAGE: AC240V-220V POWER CONSUMPTION: 1500W
FRECUENCY: 50HZ -60 HZ LAMPS: HMI1200DISCHARGE LAMP
RESISTANCE POWER: 1.5KV
INSULATING...