Manual de adherencia de pintura

Model P-A-T Paint Adhesion Test Kit | |
|[pic] |


|The P-A-T Paint Adhesion Test Kit produced by Gardco contains all of the tools and materials needed, except for the multi-tooth cutter blade, for conducting adhesion|
|tests onpaints applied to a flat, uniform surface in accordance with ASTM Test Method D 3359, method B and DIN Standard No. 53151. The multi-tooth cutter blade is |
|furnished separately to permit choice among the various available designs. |
|[pic]|
|[pic] |
|[pic]|
| |
|[pic] |
|[pic]|
|[pic] |
||
|[pic] |
|[pic]|
|[pic] |
| |
|Due to theaccuracy of the spacings and the speed with which the test can be conducted, the multiple tooth cutter is the preferred tool for use in this test except |
|when evaluations must be made on coatings applied to surfaces which are neither flat or relatively smooth. Under these adverse conditions the Gardco Paint Adhesion |
|Test Kit with Single razor Blade Type Cutter and specially designedGardco Temper II Gauge should be used. A Multi-Tooth Adhesion Cutter for pipe is also available. |
|  |
|Multiple tip cutters are available with guide teeth and six spaced teeth at 1.0 and 2.0mm. The 1.0mm spacing is also availablewith eleven teeth and guide teeth. |
|Available without guide teeth are cutters with eleven spaced teeth at 1.5mm. Also note other cutter blades illustrated in the dimensional drawings. (Ask for |
|information on special variable spaced cutters and cutters for curved surfaces.) |


|[pic]...