Advanced MPEG-4 DVR
4, 8, 16 Channel Models
This document contains preliminary information and subject to change without notice.
FCC Compliance Statement
Information to the User: This equipment has been tested and found to comply with the limits for a Class A digital
device. Pursuant to Part 15 of the FCC Rules, theselimits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area islikely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The equipment complies with the requirement of FCC CFR 47 PART 15 SUBPART B, Class A.
Explanation of Graphical SymbolsThis symbol indicates the presence of important operating and maintenance (servicing) instruction in the literature accompanying the product.
This symbol indicates the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Warnings Installation and servicing should be performed onlyby qualified and experienced personnel. Power off the DVR when connecting cameras, audio, or sensor cables. The manufacturer is not responsible for any damage caused by improper use of the product or failure to follow
instructions for the product.
The manufacturer is not responsible for any problems caused by or resulting from the user physically opening
the DVR for examination orattempting to fix the unit.
The manufacturer may not be held liable for any issues with the unit if the warranty seal is removed. Cautions
This product has multiple-rated voltages (110V and 220V). See installation instructions before connecting to the
This product uses a Lithium battery. To avoid a risk of explosion, do not replace the battery on the main board byanything other than a Lithium battery. Dispose of used batteries according to the manufacturer’s instructions. This equipment and all communication wirings are intended for indoor use only. To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. WEEE(Waste Electrical and Electronic Equipment) Customers in European Union countries are advised to dispose ofthis product, at the end of its useful life, as per applicable local laws, regulations and procedures. Important Safeguards
1. Read Instructions All safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Cleaning Unplug this equipment from the wall outlet beforecleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for cleaning. 4. Attachments Never add any attachments and/or equipment without manufacturer approval as such additions may result in the risk of fire, electric shock, or other personal injury. 5. Water and/or Moisture Do not use this equipment near water or in contact with water. 6. Accessories Do not place this equipment on anunstable cart, stand, or table. The equipment may fall, causing serious injury to a child or adult, and serious damage to the equipment. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer.
Move this equipment and cart combination with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and...