Miguel
This chapter contains the following information:
•
Details of Cause Codes and Debug Values for VoIP, page 589
•
Internal Cause Codes for SIP and H.323, page 592
Additional cause code information can be found in the Cisco IOS Debug Command Reference.
Details of Cause Codes and Debug Values for VoIP
Use the following tables when reading debugs and theassociated values within the debugs.
Q.931 Call Disconnection Causes
These are cause codes from the debug voip ccapi inout command.
Call Disconnection Cause Value (in Hex)
Meaning and Number (in Decimal)
CC_CAUSE_UANUM = 0x1
Unassigned number (1)
CC_CAUSE_NO_ROUTE = 0x3
No route to destination (3)
CC_CAUSE_NORM = 0x10
Normal call clearing (16)
CC_CAUSE_BUSY = 0x11User busy (17)
CC_CAUSE_NORS = 0x12
No user response (18)
CC_CAUSE_NOAN = 0x13
No user answer (19)
CC_CAUSE_REJECT = 0x15
Call rejected (21)
CC_CAUSE_INVALID_NUMBER = 0x1C
Invalid number (28)
CC_CAUSE_UNSP = 0x1F
Normal, unspecified (31)
CC_CAUSE_NO_CIRCUIT = 0x22
No circuit (34)
CC_CAUSE_NO_REQ_CIRCUIT = 0x2C
No requested circuit (44)CC_CAUSE_NO_RESOURCE = 0x2F
No resource (47)
CC_CAUSE_NOSV = 0x3F
Service or option not available, or unspecified (63)
Cisco IOS Voice Troubleshooting and Monitoring Guide
589
Details of Cause Codes and Debug Values for VoIP
Codec Negotiation Values
These codec negotiation values are from the debug voip ccapi inout command.
Negotiation Value
Meaning
codec=0x00000001
G711 ULAW 64KPCM
codec=0x00000002
G711 ALAW 64K PCM
codec=0x00000004
G729
codec=0x00000004
G729IETF
codec=0x00000008
G729a
codec=0x00000010
G726r16
codec=0x00000020
G726r24
codec=0x00000040
G726r32
codec=0x00000080
G728
codec=0x00000100
G723r63
codec=0x00000200
G723r53
codec=0x00000400
GSMFR
codec=0x00000800
G729b
codec=0x00001000G729ab
codec=0x00002000
G723ar63
codec=0x00004000
G723ar53
codec=0x00008000
CLEAR_CHANNEL
Cisco IOS Voice Troubleshooting and Monitoring Guide
590
Details of Cause Codes and Debug Values for VoIP
Tone Types
Tone Types
Meaning
CC_TONE_RINGBACK 0x1
Ring tone
CC_TONE_FAX 0x2
Fax tone
CC_TONE_BUSY 0x4
Busy tone
CC_TONE_DIALTONE 0x8
Dial toneCC_TONE_OOS 0x10
Out of service tone
CC_TONE_ADDR_ACK 0x20
Address acknowledgement tone
CC_TONE_DISCONNECT 0x40
Disconnect tone
CC_TONE_OFF_HOOK_NOTICE 0x80
Tone indicating that the phone is
off-hook
CC_TONE_OFF_HOOK_ALERT 0x100
A more urgent version of
CC_TONE_OFF_HOOK_NOTICE
CC_TONE_CUSTOM 0x200
Custom tone—used when you are
specifying a custom toneCC_TONE_NULL 0x0
Null tone
FAX-Rate and VAD Capabilities Values
Values
Meaning
CC_CAP_FAX_NONE 0x1
Fax disabled or not available
CC_CAP_FAX_VOICE 0x2
Voice call
CC_CAP_FAX_144 0x4
14,400 baud
CC_CAP_FAX_96 0x8
9,600 baud
CC_CAP_FAX_72 0x10
7,200 baud
CC_CAP_FAX_48 0x20
4,800 baud
CC_CAP_FAX_24 0x40
2,400 baud
CC_CAP_VAD_OFF 0x1
VAD disabledCC_CAP_VAD_ON 0x2
VAD enabled
Cisco IOS Voice Troubleshooting and Monitoring Guide
591
Internal Cause Codes for SIP and H.323
Internal Cause Codes for SIP and H.323
Each H.323 and SIP standard cause code accurately reflects the nature of the associated internal failure.
This capability makes the H.323 and SIP call control protocols consistent with cause codes that are
generated forcommon problems. For each internal failure, an ITU-T Q.850 release cause code is also
assigned and maps the new standard categories with the Q.850 release cause code and description that
is assigned to each category.
Table 56
H.323 and SIP Standard Category With Corresponding Q.850 Cause Code Information
Standard Category Description
Q.850
Cause
Code
Unallocated
(unassigned)...
Regístrate para leer el documento completo.