Nace

Supplement to Systems and Specíficatíons,
SSPC Painting Manual Volume 2 Eighth Edition
,

SSPC TR=3/NACE6A192 (2000 Revision)
Dehumidificationand Temperature Control During
Surface Preparation, Application, and Curing for
Coatings/Linings of Steel Tanks, Vessels,
and Other Enclosed Areas

\"
tha society far pmtecthe cuathgs
SSPC Publication No. 01-07
NACE Item No. 24083
ISBN:1-889060-58-5

Copyright NACE International
Provided by IHS under license with NACE
No reproduction or networking permitted without license from IHS

Not for Resale

O

THE CORROSION SOCIETY
--`,,,,,-`-`,,`,,`,`,,`---

\

--

@SSPCfor protective coatings
the society

NAC CE"
-

--`,,,,,-`-`,,`,,`,`,,`---

T HE C O R R O S I O N S O C I E T Y
N ACE 6A192 (2000 Revision)
ItemNo. 24083

SSPC-TR 3
Publication No. SSPC 01-07

J oint Technical Committee Report

Dehumidification and Temperature Control During Surface
Preparation, Application, and Curing for Coatings/Linings of Steel
Tanks, Vessels, and Other Enclosed Spaces
This NACE international (NACE)iSociety for Protective Coatings (SSPC) report represents a consensus of those individual
members who havereviewed this document, its scope, and provisions. Its acceptance does not in any respect preclude
anyone, whether he has adopted the report or not, from manufacturing, marketing, purchasing, or using products, processes,
or procedures not in conformance with this report. Nothing contained in this NACUSSPC report is to be construed as granting
any right, by implication or otherwise, to manufacture,sell, or use in connection with any method, apparatus, or product
covered by Letters Patent, or as indemnifying or protecting anyone against liability for infringement of Letters Patent. This
report should in no way be interpreted as a restriction on the use of better procedures or materials. Neither is this report
intended to apply in all cases relating to the subject. Unpredictablecircumstances may negate the usefulness o this report in
f
specific instances. NACE and SSPC assume no responsibilityfor the interpretation or use of this report by other parties.
Users of this NACWSSPC report are responsible for reviewing appropriate health, safely, environmental, and regulatory
documents and for determining their applicability in relation to this report prior to its use. ThisNACEISSPC report may not
necessarily address all potential health and safety problems or environmental hazards associated with the use of materials,
equipment, andor operations detailed or referred to within this report Users of this NACWSSPC report are also responsible
for establishing appropriate health, safety, and environmental protection practices. in consultation with appropriate regulatoryauthorities if necessary, to achieve compliance with any existing applicable regulatory requirements prior to the use of this
report.
CAUTIONARY NOTICE: The user is cautioned to obtain the latest edition of this report. NACWSSPC reports are subject to
periodic review, and may be revised or withdrawn at any time without prior notice. NACE and SSPC require that action be
taken to reaffirm, revise,or withdraw this report no later than ten years from the date of initial publication.
Approved December 2000
02000, NACE Internationaland SSPC
NOTICE TO THE READER: The NACE and SSPC releases of this publication contain identical wording in the same
sequence. Publication format may differ.
SSPC: The Society for Protective Coatings
40 24th Street, 6th Floor
Pittsburgh, PA 152224656
+I281-2331
(412)

NACE International
1440 South Creek Drive
Houston, TX 770844906
+ I (281) 228-6200

Printed by NACE International

Copyright NACE International
Provided by IHS under license with NACE
No reproduction or networking permitted without license from IHS

Not for Resale

NACE GAl92BSPC-TR 3
Foreword
This report was originally prepared by NACE Task Group
T-6A-60 on The...