Net Monitor

Nokia
NetMonitor
Manual
Version 0.95
11.11.2002

Document keeper
Base document
PDF + Enhancements to base document
Graphics

:
:
:
:

nobbi (nobbi@nobbi.com)
Flipo (flipo@gyral.com)
nobbi
nobbi

Phone Models and Software versions
Notes for 21xx / 31xx / 81xx phones
The older phones netmonitor has some differences when compared with the one of newer models, but
this manualcan be used as a guide, because the overall working method and the display contents are
very similar in most cases.
Notes for 51xx/61xx/62xx/71xx/88xx/91xx/32xx and other phones
This document covers the majority of pages from these phones netmonitor. Some of them may have
little differences, like missing/additional pages, different info, etc.
The 51xx and 61xx pages are almost identical,there are a few pages concerning multiband information
in 6150 which are different in the singleband phones, and the xx90 pages are partially different, because
of some special things in GSM1900.
The 32xx has some more pages, which are not very well documented yet.
The 62xx and 71xx have a whole bunch of pages concerning W@P and the large internal flash memory.
These are not documented yet. Ifyou have any clue about theses pages, send me a mail.
The 91xx pages are almost identical to the 6110 ones, with few additional pages.
The goal right now is to make an accessible manual, that will get better over the time. Please contribute
with all the info that you find relevant. Please note that this manual does only deal with pages which are
of known content, so if a page is not mentionedhere, I have most likely no knowledge about the
meaning of the page.

Used Information Sources :
[1]

Netmonitor description (RD843.txt) from Nokia Mobile Phones

[2]

Marcin Wiaceks homepage (http://marcin-wiacek.topnet.pl/)

[3]

Researches from Nobbi & various other people

2

Menu Modes
There are three Menu Display modes:
-

the execute mode
the data display mode
thehelp mode

Different modes are marked in this manual as follows:
**************
*
*
*
Execute *
*
Mode
*
*
*
**************

++++++++++++++
+
+
+Data display+
+
Mode
+
+
+
++++++++++++++

##############
#
#
#
Help
#
#
Mode
#
#
#
##############

The execute mode is entered from the menu by selecting a menu directly with his number. If the test
index enteredpertains to a test that resets a timer (test 80) for example, then the timer is reset as soon
as the OK button has been pressed in the menu, and the data display mode takes over. In other words,
the execute mode is of the one-shot type. To run another test in the execute mode, the Field Test
Display menu must be reactivated.
So, be very careful when jumping to a netmonitor page directly from themenu selection. You may
activate the execute mode incidentally, causing your phone to behave not as expected.
The data display mode is active by default when the Netmonitor is active. During data display mode, the
field test data is visible on the main display.
During help mode, one screen of instructions is shown for each test to make it easier to identify the test
in question. A long pressof the asterisk (*) is used to toggle between these two modes.
The arrow keys (^,v) offer an easy way to switch to another test without using the menu. However,
nothing will be executed or set on although such tests would be passed. This is to prevent the user from
accidentally clearing any valuable data. The help mode is also a non-execute mode. Display numbers
have been selected in such waythat no 5-terminated test number is an execute display.

Reserving SIM phonebook locations
When using a phone with enabled field test displays, it is highly recommended to put some default data
into the SIM phonebook locations that are used by some field test displays. Especially Test 17 (BTS
TEST) may give some confusing results if SIM phonebook location 33 is not correctly configured....