Panel view got 1000

Solo disponible en BuenasTareas
  • Páginas : 10 (2409 palabras )
  • Descarga(s) : 0
  • Publicado : 28 de enero de 2012
Leer documento completo
Vista previa del texto
Mitsubishi Graphic Operation Terminal GOT1000 Series

New Product Release

GT16 Model

5.7-inch Type
GT1655-VTBD [New Release] NEW

 User memory capacity: 15MB  USB host and USB device  Standard interface: Ethernet, RS-422/485, RS-232  Multi-channel function: 4 channels  LED backlight LCD, analog touch panel  IP67f environmental protective structure

Extension unit (1ch)





USB host & USB device
Refer to the back side for details on the supported software versions and specifications.

Advanced New Functions
Check logging data with numerical values

GT Works3 Version 1.28E

GOT 1000

Send files from GOT to personal computer

GOT 1000

16 15 Historical datalist display
 Logging data collected using the logging function can be displayed in list format.  By using the time being selected on the historical data list display, trend graphs of the same time can easily be searched and displayed.
Log the product A, B, and C production volume in a 5-minute cycle
Logging data 2010/11/22 09:55 2010/11/22 10:00 2010/11/22 10:05 2010/11/22 10:10 2010/11/2210:15 : 2010/11/22 16:50



16 15 File transfer function (FTP client)
 With a few simple settings, files (alarm log files, hard copies, etc.) of resource data stored in the GOT’s CF card and USB memory*1 can be sent from the GOT to a personal computer.
Personal computer (FTP server*2)




Logging file, etc.

Alarm log file, hard copy, etc. Ethernet
CF card,etc.

CF card, etc.

List display


GOT (FTP client)

GOT (FTP client)

*1: USB memory is supported only by GT16. *2: Microsoft IIS (Internet Information Service) FTP servers are supported.

GT Designer3 Simple Help Function
 Find the information you need easily! Press the F1 key to jump directly to help contents for the currently active dialog!

Improved GT SoftGOT1000functions
 MODBUS®/TCP connections are supported.  Internal device interface functions can be used in the following environments. Microsoft® Visual C++®/Visual C#®/Visual Basic® included with Microsoft® Visual Studio 6.0/.NET (2002)/.NET 2003/2005/2008

GT1655-VTBD Specifications
General specifications
Item Operating ambient Display temperature*1 Other than display Storage ambient temperatureOperating ambient humidity Storage ambient humidity Specification 0 to 50˚C 0 to 55˚C −20˚C to 60˚C 10 to 90%RH, no condensation 10 to 90%RH, no condensation Frequency Acceleration Half amplitude Sweep count 5 to 9Hz − 3.5mm 10 times each in X, Conforming to Under intermittent Y and Z directions 9 to 150Hz 9.8m/s2 − JIS B 3502 and vibration IEC 61131-2 5 to 9Hz − 1.75mm Under continuous − vibration− 9 to 150Hz 4.9m/s2 Conforming to JIS B 3502 and IEC 61131-2 (147m/s2, 3 times each in X, Y and Z directions) No oily smoke, corrosive gas or combustible gas, less conductive dust, away from direct sunlight (the same in storage) 2000m or less In control panel II or lower 2 or less Self-cooling Type D grounding (100Ω or less). Connect to panel if unable to ground. International Standards (UL/cUL,CE), Maritime Standards (ABS, BV, DNV, LR, NK, GL, RINA*5)

Power supply specifications
Item Input power supply voltage Specification 24VDC(+25%, −20%) 16W or less Power consumption With backlight off 14W or less Inrush current 67A or less (1ms, at max. load) Permissible instantaneous failure time Within 10ms Noise voltage 500Vp-p, noise width 1μs Noise resistance by noise simulator with noisefrequency 25 to 60Hz Withstand voltage 500VDC for 1 minute between power supply terminal and ground 10MΩ or higher with an insulation resistance tester Insulation resistance (500VDC between power supply terminal and ground) Applicable wire size 0.75 to 2 [mm2] Clamp terminal Clamp terminals for M3 screw RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A Tightening torque 0.5 to 0.8 [N·m] (terminal block's...
tracking img