Primera Vez

YOUR 206 AT A GLANCE
Pages 72 - 81 28 - 29 35 - 71, 93 - 94 96

1

Seats Instruments and controls Control panel Mirrors

Checks Access Changing a wheel Changing a bulb

Pages 111 - 118 83 - 88 119 - 122, 151 123 - 127

Each model may only be fitted with some of the equipment shown, according to its specification and the technical requirements in the country of first registration of thevehicle. 206 SW: version available according to country. 24-02-2003

2

YOUR 206 AT A GLANCE

24-02-2003

YOUR 206 AT A GLANCE
1 Side window demisting vents Adjustable side vent Passenger air bag Windscreen demisting vents Multifunction display Central locking switch Hazard warning lights switch Instrument dials lighting rheostat Lights and direction indicators stalk 14 Audio equipmentremote control 15 Headlamp height adjustment 16 Passenger air bag disarming switch* 17 Rear window locking switch 18 Dynamic stability control (ESP/ASR) button 19 Storage compartment 31 Glove box 20 Fuse box 10 Steering wheel height adjustment control 11 Steering lock 24-02-2003 32 Bonnet opening control 21 Gear lever 22 Lighter * According to destination. 12 Windscreen wiper stalk 13 Driver'sair bag Horn 3 4 24 Front electric window switches 25 Electric mirrors switch 26 Handbrake 27 Front ashtray 28 Controls for heating, ventilation, air conditioning and heated rear screen and mirrors 29 Audio equipment 30 Adjustable centre vents 9 23 Alarm button

3

2

5 6 7

8

10

YOUR 206 AT A GLANCE

Rear seats
➜ Lift the front of the seat cushion 1, ➜ Tilt the seat cushion 1against the front seats, ➜ Position the seat belt under the belt holder 2, ➜ Pull control 3 to unlock the seat back 4, ➜ Remove or lower the head restraint, ➜ Tilt the seat back 4. When refitting, take care not to trap the seat belts.

Tonneau
To install: ➜ position (1) one end of the tonneau roller in one of the two supports, ➜ compress (2) the opposite end of the roller and position it, ➜ releaseit (3) so that it engages, ➜ unroll (4) the tonneau to the boot pillars, ➜ insert the tonneau guides in the rails on the pillars. To remove: ➜ remove the tonneau guides from the rails on the pillars, ➜ return the tonneau to its roller, compress it and remove it from its support.

76

103

24-02-2003

100

YOUR 206 IN DETAIL
BOOT LAYOUT (SALOON)

Rear parcel shelf
To remove theshelf: – unhook the two strings 1, – slightly raise the shelf, remove it.

Stowing rings
then Use the stowing rings on the boot floor and on the back of the rear seat to secure your luggage.

Retaining strap
A strap secured to the side of the boot enables you to secure various objects (cans, first aid kit etc.).

Luggage retaining net
Hooked onto the stowing rings, this enables your luggageto be secured.

There are several options for storing the shelf: – either behind the front seats, – or behind the rear seat using the luggage retaining net, – or flat in the boot. 24-02-2003

102

YOUR 206 IN DETAIL

24-02-2003

103

YOUR 206 IN DETAIL
BOOT LAYOUT (206 SW)
1. Grab handles and coat hooks 2. Coat hooks There are six hooks to accommodate coats. 3. High load retainingnet fastenings The high load retaining net can be installed behind the front seats or behind the rear seat. Open the covers of the corresponding upper fastenings. Install one end of the metal bar in one of the two fastenings, compress the bar, then install the other end and release. Secure the two net strap hooks behind the front seats, with the rear seat folded down, or in the stowing rings on thefloor. The rings are located directly below the corresponding upper fastenings. Pull the two straps taut. 4. Hooks There are two side hooks on which to hang light bags. 5. 12 V Socket for accessories This is a 12 volt socket (lighter type) installed on the the rear left trim and supplied from the accessories position (1st notch). 6. Storage nets There are two nets (which cannot be removed)...