Qrd!!!$

QRD1113/1114
REFLECTIVE OBJECT SENSOR
PACKAGE DIMENSIONS
0.083 (2.11) OPTICAL CENTERLINE 0.240 (6.10) 0.120 (3.05) PIN 1 INDICATOR

FEATURES
• Phototransistor Output • No contact surfacesensing • Unfocused for sensing diffused surfaces • Compact Package • Daylight filter on sensor

0.173 (4.39)

0.183 (4.65)

NOTES
0.500 (12.7) MIN

(Applies to Max Ratings and CharacteristicsTables.)

0.020 (0.51) SQ. (4X)
2 3

0.100 (2.54)
1 4

1. Derate power dissipation linearly 1.33 mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended ascleaning agents. 4. Soldering iron 1/16” (1.6mm) from housing. 5. As long as leads are not under any spring tension. 6. D is the distance from the sensor face to the reflective surface. 7. Cross talk(ICX) is the collector current measured with the indicator current on the input diode and with no reflective surface. 8. Measured using an Eastman Kodak neutral white test card with 90% diffusedreflecting as a reflective surface.

0.083 (2.11)

PIN 1 COLLECTOR PIN 2 EMITTER

PIN 3 ANODE PIN 4 CATHODE

SCHEMATIC
2 3

NOTES: 1. Dimensions for all drawings are in inches (millimeters). 2.Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. 3. Pins 2 and 4 typically .050” shorter than pins 1 and 3. 4. Dimensions controlled at housing surface.

1

4ABSOLUTE MAXIMUM RATINGS
Parameter Operating Temperature Storage Temperature Lead Temperature (Solder Iron)(2,3) Lead Temperature (Solder Flow)(2,3) EMITTER Continuous Forward Current ReverseVoltage Power Dissipation(1) SENSOR Collector-Emitter Voltage Emitter-Collector Voltage Power Dissipation(1)

(TA = 25°C unless otherwise specified) Symbol TOPR TSTG TSOL-I TSOL-F IF VR PD VCEO VECO PD100 Rating -40 to +85 -40 to +85 240 for 5 sec 260 for 10 sec 50 5 100 30 Units °C °C °C °C mA V mW V V mW

1 of 4

100030A

QRD1113/1114
REFLECTIVE OBJECT SENSOR
ELECTRICAL / OPTICAL...