Suelos

GB

OPERATING INSTRUCTIONS - DIAMOND CORE DRILL DK 22, DK 32, DK 34

Please read these instructions carefully before starting up the machine! In the WEKA diamond core drilling machine you have an outstanding quality product with which you will be very satisfied, provided you use it properly. Specifications Machine type Nominal voltage Nominal current Nominal power Power output Nominalfrequency Speed (full load) DK 22 DK 22 L 230 230 11,5 11,5 2400 2400 1640 1640 50-60 50 - 60 300 250 640 520 960 780 Drill i in concrete - mm 40 - 250 50 - 300 * Weight kg 11,9 11,9 Tool fixture DK 22 (L,S), DK32 - 1 1/4" UNC Tool fixture DK 2203 (L,S) - 1 1/4" + G 1/2" V A W W Hz 1/min DK 22 S 230 11,5 2400 1640 50 - 60 420 880 1300 30 - 180 11,9 DK 32 230 15 3200 2300 50 - 60 230 480 720 55 - 350 11,9DK 32 S 230 15 3200 2300 50 - 60 300 590 930 40 - 250 11,9 DK 34 230 15 3200 2300 50 - 60 150 300 470 85 - 400 12,9

* Holes with diameters over 250 mm can only be established with particulary stable rigs and the use of heavy duty dowels for fastening Operating data DK 22 Position/speed Drill i concrete Water volume approx. Operating data DK 22 L Position/speed Drill i concrete Water volumeapprox. Operating data DK 22 S Position/speed Drill i concrete Water volume approx. Operating data DK 32 Position/speed Drill i concrete Water volume approx. Operating data DK 32 S Position/speed Drill i concrete Water volume approx. Operating data DK 34 Position/speed Drill i concrete Water volume approx.

1/min mm l/min 1/min mm l/min 1/min mm l/min 1/min mm l/min 1/min mm l/min 1/min mm l/min1/300 130 - 250 1,5 - 2,0 1/250 150 - 300 1,6 - 2,2 1/420 90 - 180 1,2 - 1,7 1/230 165 - 350 1,7 - 2,4 1/300 125 - 250 1,5 - 2,0 1/150 250 - 400 2,0 - 2,5

2/640 60 -120 1,0 - 1,4 2/520 75 - 150 1,1 - 1,6 2/880 45 - 85 0,8 - 1,2 2/480 80 - 160 1,1 - 1,6 2/590 65 - 130 1,0 - 1,5 2/300 125 - 250 1,5 - 2,0

3/960 40 - 80 0,8 - 1,1 3/780 50 - 100 0,9 - 1,3 3/1300 30 - 60 0,7 - 1,0 3/720 55 - 1050,9 - 1,3 3/930 40 - 80 0,8 - 1,2 3/470 80 - 160 1,2 - 1,6

8

1.

TECHNICAL DESCRIPTION

DK22, DK32 and DK34 are diamond core drills which are operated only when fixed in a rig (2) (rigcontrolled).This core drill is only intended for professional use and may only be operated by trained personnel. Proper use extends only to the drilling of rock, concrete masonry and asphalt. By theaddition of water through the diamond drill bit (3) via the ball valve (1a) the drilled material is flushed away and the tool cooled (wet drilling). The drilling tool, the diamond drill bit (3), is a hollow drill (tube) which is fitted with soldered-on or welded-on segments impregnated with diamonds. If necessary, the flushing water is extracted through a water collecting ring (4) by means of anall-purpose suction unit. ATTENTION: Avoid wet drilling upwards (overhead drilling). If it is indispensable use absolutely a perfect, all right and functioning water-collecting ring. 1.1 Scope of delivery

Diamond core drilling machine (1) with ball valve and plug-in nipple (1a), PRCD (GFCI) circuit-breaker (1b) and operating instructions. 1.2 Noise emissions and vibration (EN 50144)

The typicalA-rated sound pressure level is 86 dB(A). The typical A-rated sound level is 99 dB. The typical rated acceleration is 2.5 m/s². 2. PREPARATION

Satisfy yourself that the machine has not been damaged in transit. Check that the nominal voltage is the same as the voltage indicated on the rating plate. 2.1 Electrical connection

According the European standards EN 61029-1 and IEC 1029-2-6, theelectrical connection of diamond core drills with water supply must be operated via a residual current device (RCD, PRCD) and to a properly earthed socket. In accordance with these regulations, the DK22/DK32/DK34 is fitted with an inline protector (PRCD) (1b) mounted in the cord. This contains both, RCD protection and undervoltage tripping. The PRCD must be switched on using the ON key after the power...