Variedad informatica

Buttons
This card shows the Business Series Terminals buttons. The table below shows which buttons to use on the different types of Nortel Networks telephones.
T7100, T7208, T7316 ≤ ≥ √ ® M7100, M7208, M7310, M7324

Button Name Feature Hold Volume Control Release

Ä ú Ã ¨

Norstar features
Background Music Button Inquiry Call Duration Call Forward Call Park

≤°fl

Cancel ≤£°flListen to music (provided by your office) through your telephone speaker when you are not on a call.

≤•‚
Check what is programmed on any button. Useful when labeling buttons.

≤‡‡
Briefly display the approximate length of your current or most recent call.

≤› ≤‡›

Cancel ≤£›

Send your calls to another telephone in your Norstar system. Put a call on hold so that it can be picked up fromany telephone in your Norstar system. The display shows a three-digit retrieval code. To retrieve a parked call, press Æ and dial a retrieval code on any telephone in your Norstar system. On the M7100 telephone, just lift the handset and dial the retrieval code.

Call Pickup directed Call Pickup group

≤‡fl
Answer any ringing telephone. Press ≤‡fl and dial that telephone’s extension number.≤‡fi
Answer a call that is ringing at another telephone in your pickup group. The external call that has been ringing longest is answered first.

* Meridian and Norstar are trademarks of Northern Telecom Page 3

Call Queuing

≤°‚⁄
Answer the next call. If more than one call is waiting, priority is given to incoming external calls over callback, camped, or transferred calls.

Camp-on

≤°¤Re-route a call to another telephone, even if all its lines are busy. Press ≤°¤, then dial the extension number of the receiving telephone.

Custom Call ≤•°‹¤ Routing(CCR) Turn CCR on or off. You must enter the System Coordinator or Basic password. Class of Service password

≤fl°
Change the dialing filters on a line or telephone for your next call, or gain external access to your system.Dialing filters determine which numbers you can dial. Press ≤fl° and enter a password provided by your system coordinator to change your class of service.

Conference

≤‹
Establish a conference call between yourself and two other parties. 1. Make or answer the first call. 2. Put the first call on hold. 3. Make or answer the second call. 4. After the second call is connected, press ≤‹. 5. Press theline or intercom button of the first held call (not required on the M7100 telephone). 6. Press ® to end the conference call. To remove yourself from a conference permanently (unsupervised conference): Press ≤‡‚. The other two callers remain connected. (Some external lines may not support this feature. See your system coordinator.) To put a conference on hold: Press ≥. The other two callers canstill talk to each other. To split a conference: Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press ≤‹. To disconnect one party: Press the line or intercom button of the caller you want to disconnect, then press ®. Press the line or intercom button of the remaining caller to resume your conversation. Toindependently hold two calls: Press the line or intercom button of the first caller, then press ≥. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press ≤‹, then retrieve the second call from hold.

Contrast adjustment

≤•‡
Adjust the contrast of your display. Press ≤•‡, then press a number from⁄ to · (depending on your telephone). Press ≥to set your choice.

Dialing modes

≤•°¤
Choose one of three methods of dialing. 1. Press ≤•°¤. 2. Press £ to select the mode.

Page 4

3. Press ≥ to store the mode. Standard Dial: Select a line, then dial the number. (Standard Dial is always available, even when another dialing mode is selected.) Automatic Dial: Dial the number without choosing a line button first. Your prime line...