Presentation

{0>EIGRP Troubleshooting Lab (Instructor Version)<}96{>Práctica de laboratorio de resolución de problemas de EIGRP<0}
{0>Topology Diagram <}100{>Diagrama de topología<0}

{0>Addressing Table<}100{>Tabla de direccionamiento<0}
{0>Device<}100{>Dispositivo<0} | {0>Interface<}100{>Interfaz<0} | {0>IP Address<}100{>DirecciónIP<0} | {0>Subnet Mask<}100{>Máscara de subred<0} | {0>Default Gateway<}100{>Gateway por defecto<0} |
{0>HQ<}100{>HQ<0} | {0>Fa0/0<}100{>Fa0/0<0} | 172.18.64.1 | 255.255.192.0 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/0<}100{>S0/0/0<0} | 209.165.202.129 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
|{0>S0/0/1<}100{>S0/0/1<0} | 209.165.202.133 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
{0>BRANCH1<}100{>BRANCH1<0} | {0>Fa0/0<}100{>Fa0/0<0} | 172.18.129.1 | 255.255.255.240 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/0<}100{>S0/0/0<0} | 209.165.202.130 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} || {0>S0/0/1<}100{>S0/0/1<0} | 209.165.202.137 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
{0>BRANCH2<}100{>BRANCH2<0} | {0>Fa0/0<}100{>Fa0/0<0} | 172.18.128.1 | 255.255.255.0 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/0<}100{>S0/0/0<0} | 209.165.202.138 | 255.255.255.252 | {0>N/A<}100{>Noaplicable<0} |
| {0>S0/0/1<}100{>S0/0/1<0} | 209.165.202.134 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
{0>PC1<}100{>PC1<0} | {0>NIC<}100{>NIC<0} | 172.18.129.14 | 255.255.255.240 | 172.18.129.1 |
{0>PC2<}100{>PC2<0} | {0>NIC<}100{>NIC<0} | 172.18.100.100 | 255.255.192.0 | 172.18.64.1 |
{0>PC3<}100{>PC3<0} |{0>NIC<}100{>NIC<0} | 172.18.128.10 | 255.255.255.0 | 172.18.128.1 |

{0>Learning Objectives<}100{>
{0>Task 1:<}100{>Tarea 1:<0} {0>Cable, Erase, and Reload the Routers.<}100{>Conexión, eliminación y recarga de los routers.<0}
{0>Step 1:<}100{>Paso 1:<0} {0>Cable a network.<}100{>Conectar una red.<0}
{0>Cable a networkthat is similar to the one in the Topology Diagram.<}100{>Conecte una red que sea similar a la del Diagrama de topología.<0}
{0>Step 2:<}100{>Paso 2:<0} {0>Clear the configuration on each router.<}100{>Eliminar la configuración en cada router.<0}
{0>Clear the configuration on each of the routers using the erase startup-config command and then reload therouters.<}99{>Borre la configuración de cada uno de los routers mediante el comando erase startup-config y luego reload para recargar los routers.<0} {0>Answer no if asked to save changes.<}100{>Si se le pregunta si desea guardar los cambios, responda no.<0}
{0>Task 2:<}100{>Tarea 2:<0} {0>Load Routers with the Supplied Scripts.<}100{>Cargar los routers con losguiones provistos.<0}
{0>Step 1:<}100{>Paso 1:<0} {0>Load the following script onto the BRANCH1 router:<}100{>Cargue el siguiente guión en el router BRANCH1:<0}
{0>hostname BRANCH1<}84{>hostname BRANCH1<0}
!
{0>no ip domain-lookup<}100{>no ip domain-lookup<0}
!
{0>interface FastEthernet0/0<}100{>interface FastEthernet0/0<0}{0>ip address 172.18.129.1 255.255.255.240<}0{>ip address 172.18.129.1 255.255.255.240<0}
{0>duplex auto<}100{>duplex auto
No shutdown<0}
{0>speed auto<}100{>speed auto<0}
!
{0>interface Serial0/0/0<}100{>interface Serial0/0/0<0}
{0>ip address 209.165.202.130 255.255.255.252<}100{>ip address 209.165.202.130 255.255.255.252<0}...