'Psicologia Fisiologica"

Design Options

◄ It won't take long for you to realize how handy your workbench really is. And the more you use it, the more the edges of the top will show signs of wear and tear. To help protect the edges of the benchtop, you can add solid wood edgebanding, like you see in the drawing on the left. It's a great way to add some durability and dress up the look of your bench.
To get some helpassembling Edgebanding Joints, view the SkillBuilder™ 'Edgebanding Section' on the Kreg Jig® DVD.

► To make your workbench even more useful, consider adding the Kreg Klamp System™ components to the table’s surface. Klamp System™ components make it easier than ever to get perfectly flush Kreg Joints and serve as an extra ‘‘helping hand’’ around the shop for almost every other task. With the KregTrak™ attached, you can position the Bench Klamp™ anywhere along the length of the Trak and remove it just as easily to regain your perfectly flush work surface.To learn more about Klamp System™ components or how to install, visit www.kregtool.com

You can visit us online for additional resources such as accessories, project plans, product manuals, and more tips and techniques for getting themost out of your Kreg Jig®.

Online: www.kregjig.com | Phone: 800.447.8638 Email: customerservice@kregtool.com
ITEM # PLAN-WORKBENCH

R

www.kregjig.com
R

Workbench

Kreg Jig
Project Plan

®

Workbench W h a t Yo What you’ll need u ’ l l N e e d
Project Plan

TOOLS

Circular Saw

Drill

Jig Saw

Right Angle Clamp

Kreg Face Clamp or C-clamp

HARDWARE & SUPPLIES
50100 1

SHOPPING LIST
Quantity Description SML-C250 21⁄2", #8 Coarse, Pocket-Hole Screws SML-C125 11⁄4", #8 Coarse, Pocket-Hole Screws Bottle of Wood Glue Sheets 120-Grit Sandpaper

25”

2

Materials
CUTTING DIAGRAM
SHOPPING LIST
Quantity Description 5 each 3 each 2x4’s - 8' long 2' x 4' x 3⁄4"-thick MDF Panels

Workbench
Project Plan
PARTS TO CUT
Part Qty. Description 4 Legs A B CD E
4 4 2 1 Long Rails End Rails Top Shelf Length 34" 37" 191⁄2" 48" 44" Width 3 ⁄2"
1

Thickness 11⁄2" 11⁄2" 11⁄2"
3 3

31⁄2" 31⁄2" 24" 22 ⁄2"
1

⁄4" ⁄4"

A
34" 34" 19 1/2" 19 1/2" 37" 37"

A
34" 34" 37" 37"

C
19 1/2" 19 1/2"

24"

D

E

22 1/2"

B

SkillBuilder DVD Icon
TM

When you see this DVD logo, please reference the Skill Builder DVD for in-depth tips onhow to build the featured joint.

25”

How to Build it!
STEP-BY-STEP
FRONT & BACK FRAMES
B
37"

A
1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2

A

Before you get started, you’ll want to measure out and cut the parts that are made from the 2x4’s. Take a look at the Cutting Diagram on the other side of these plans to help you out. The first thing you’ll do is build the front and backframes, as shown in the drawing on the left. 1. Locate the four long rails (Parts ‘B’) and drill the Pocket-Holes as shown. The location of the PocketHoles isn’t critical. Use the jig settings shown in the drawing. 2. Now attach the long rails to the legs (Parts ‘A’) at the locations shown. The top rail should be flush with the top of the legs. The bottom rail should be 4" from the bottom of theleg as shown.

KREG JIG® SETTING
34"

Use 21⁄2"-long Pocket-Hole Screws with Coarse Threads

B
4"
1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2

TIP:

To get some help making this joint, view the SkillBuilder™ "Assembling Face Frames" section on the Kreg Jig ® DVD.

KREG JIG® SETTING
Use 11⁄4"-long Pocket-Hole Screws with Coarse Threads

ADDING THE END RAILS
3. Now drill all of thePocket-Holes in the shorter end rails (Parts ‘C’) where indicated in the drawing at the left. Use the same settings as you did on the long rails above.

C
19 1/2"

A
Use 21⁄2"-long Pocket-Hole Screws with Coarse Threads

B C

4. Attach the four end rails to one of the frames you’ve already assembled. These rails will be at the same locations on the legs as the rails on the frame, with...