Ciencia

There are two ways to upgrade your router, but before you upgrade it there is something you should know.
1) Write down all the current settings as you have to enter them manually afterupgrade.
2) Choose the firmware which has the same hardware version as yours.
3) Do NOT upgrade firmware from a computer with a wireless connection. Use a computer that you canconnect to the router with an Ethernet cable. You may damage the router due to the increased packet loss with a wireless connection.
4) Do NOT turn off the power during upgrading.

1、Ifyour web-based upgrade page is similar to the follow, please refer to the steps below.
[pic]
Step 1 Run tftpd32.exe, and keep it on till upgrade successfully.
Step 2 Log into the Routerby typing http://192.168.1.1 in the address field of the browser (such as Internet Explorer, Netscape). Both the User Name and Password are admin unless you have changed it.
Step 3Click System Tools > Firmware, Click Upgrade button, Wait for the router to reboot.
Note: Make the IP address of tftpd32.exe agree with your computer, so does the name of .bin file.
Step 4Verify that the router’s firmware is upgraded.
Step 5 Reenter the settings you have noted down before upgrading.

2、If your web-based upgrade page is familiar with the follow, pleaserefer to the steps below.
[pic]
Step 1 Log into the Router by typing http://192.168.1.1 in the address field of the browser (such as Internet Explorer, Netscape). Both the User Nameand Password are admin unless you have changed it.
Step 2 Click System Tools > Firmware on the left, click the Browse button to choose the firmware (.bin file) you downloaded before.Step 3 Click the Upgrade button, Wait for the router to reboot.
Step 4 Verify that the router’s firmware is upgraded.
Step 5 Reenter the settings you have noted down before upgrading.