BSR 1000 Cable Modem Termination System and Router
Motorola’s Broadband Services Router 1000 (BSR 1000) is a compact, high-performance Cable Modem Termination System (CMTS) and full-featured router that enables broadband service providers to cost-effectively deliver voice, data, and multimedia content and services. The BSR 1000 is a 1U, rack-mountable platformwith an integrated up converter, and is a perfect solution for small or medium-sized distribution hubs or for larger sites in the earlier stages of broadband service market penetration. Broadband providers can also deploy space-saving BSR 1000s in hospitality locations or Multiple Dwelling Unit (MDU) facilities to extend broadband access services. The compact BSR 1000 can be deployed as astand-alone unit or in small clusters to cost-effectively extend broadband access infrastructure to additional subscribers. This easy-to-use platform helps carriers develop a competitive edge in defining, deploying, and managing broadband services. The BSR 1000 implements SmartFlow™ features to cost-effectively extend the rich Quality of Service (QoS) support required to deliver multiple services. It canbe installed by non-technical personnel and can operate as a Layer 2 bridge or as an edge router with enhanced security features. Traffic flows from multiple BSR 1000s can be aggregated by the carrier-class Broadband Services Router 64000 (BSR 64000) to bring robust traffic management to a distributed environment. The BSR 1000 changes the value proposition for small broadband access networklocations by offering a highly compact CMTS solution that can be installed in minutes to enable the cost-effective delivery of voice, data, and multimedia content and services.
The BSR 1000 enables broadband service providers to cost-effectively deliver voice, data, and multimedia content and services.
• The compact, space-saving, 1U platform can be installed in minutes bynon-technical personnel • Fully compatible with the carrier-class BSR 64000 • Based on open systems standards, the BSR 1000 is Data Over Cable Service Interface Specification (DOCSIS) and EuroDOCSIS 1.1 qualified and is compatible with PacketCable 1.0 • Managed via SNMP v1 and v3, standard DOCSIS and IETF MIBs, and a Command Line Interface • Advanced Spectrum Management to ensure reliable andhigh-quality service delivery • Supports 16,000 service flows to enable individual voice, data, and multimedia streams to be handled effectively • SmartFlow QoS classification for thousands of flows at wire-speed with guaranteed Service Level Agreements (SLAs) • Full-featured routing with support for intradomain, interdomain, and multicast routing including OSPF v2, RIP v1 and v2, BGP4, IS-IS, VRRP, IGMP,DVMRP, and PIM-SM
Distributed QoS and Multi-Service Support Broadband access networks deliver the capacity required for converged data, voice, and multimedia services. The BSR 1000 is a flexible platform that enables the convergence of these services at the Internet Protocol (IP) level. It allows broadband operators to support multiple services from one-or-more providers. Operators can delivermeasurable QoS from the subscriber to the backbone networks of multiple service providers. SmartFlow allows operators to classify packets into flows based on packet content and provide the appropriate QoS treatment for each traffic flow according to DOCSIS 1.1 standards.
Full-Featured Routing Operators can deploy the BSR 1000 to serve as a self-configuring CMTS/router or as a Layer 2 CMTS. Eachrouting protocol implemented on the BSR 1000 offers maximum expansion to support new services, subscribers, and providers. A full suite of unicast routing protocols is supported, including carrier-class implementations of advanced routing protocols such as Routing Information Protocol (RIP) v1, RIP v2, Open Shortest Path First (OSPF) v2, Border Gateway Protocol (BGP) 4, and Intermediate...