Como Hacer Una Avión
You don’t have to be a Wright brother to make your own airplane. All you need is a piece of paper and a moment when your teacher isn’t looking. To make a paperairplane, try one of the methods below.
Steps
Standard Airplane
1. -------------------------------------------------
Fold a standard piece of printer paper (typically 8.5 by 11 inches) in halfvertically and crease.
-------------------------------------------------
2. -------------------------------------------------
2Open up the paper so that the crease is vertical and fold the top twoouter corners inwards so that they meet along the middle crease.
-------------------------------------------------
3. -------------------------------------------------
3Fold the point madein the previous step down to the crease so that the flaps are tucked under this fold. Now the paper should look somewhat like the back of an envelope.-------------------------------------------------
4. -------------------------------------------------
4Fold the two top corners created in the previous step to the center crease so that the points are about 2/3 of the way down the centercrease flap.
-------------------------------------------------
5. -------------------------------------------------
5Fold up the point that has been covered in the previous step so that itsecures the flaps against the crease.
-------------------------------------------------
-------------------------------------------------
Fold the paper in half (along the vertical crease youcreated in Step 1) so that all the folds made in the previous steps are facing outwards. The small triangular fold is now along what will later be the bottom of the plane.-------------------------------------------------
6. -------------------------------------------------
7Fold both side flaps down to the bottom so that the wings are perfectly aligned with the bottom of the airplane....
Regístrate para leer el documento completo.