Como instalar joomla

CCNAS FINAL 100%
1 Which Cisco IOS configuration option instructs the IPS to compile a signature category named ios_ips into memory and use it to scan traffic? R1(config)# ip ips signature-category R1(config-ips-category)# category all R1(config-ips-category-action)# retired false R1(config)# ip ips signature-category R1(config-ips-category)# category ios_ips basicR1(config-ips-category-action)# retired false R1(config)# ip ips signature-category R1(config-ips-category)# category all R1(config-ips-category-action)# enabled true R1(config)# ip ips signature-category R1(config-ips-category)# category ios_ips basic R1(config-ips-category-action)# enabled true

2 Refer to the exhibit. An administrator has configured router R1 as indicated. However, SDEE messages fail to log. Whichsolution corrects this problem? Issue the logging on command in global configuration. Issue the ip ips notify sdee command in global configuration. Issue the ip audit notify log command in global configuration. Issue the clear ip ips sdee events command to clear the SDEE buffer.

3

Which three principles are enabled by a Cisco Self-Defending Network? (Choose three.) adaptability collaborationinsulation integration mitigation scalability

4

What are two disadvantages of using network IPS? (Choose two.) Network IPS has a difficult time reconstructing fragmented traffic to determine if an attack was successful. Network IPS is incapable of examining encrypted traffic. Network IPS is operating system-dependent and must be customized for each platform. Network IPS is unable to provide aclear indication of the extent to which the network is being attacked. Network IPS sensors are difficult to deploy when new networks are added.

5

Which access list statement permits HTTP traffic that is sourced from host 10.1.129.100 port 4300 and destined to host 192.168.30.10? access-list 101 permit tcp any eq 4300 access-list 101 permit tcp 192.168.30.10 0.0.0.0 eq 80 10.1.0.0 0.0.255.255access-list 101 permit tcp 10.1.129.0 0.0.0.255 eq www 192.168.30.10 0.0.0.0 eq www access-list 101 permit tcp 10.1.128.0 0.0.1.255 eq 4300 192.168.30.0 0.0.0.15 eq www access-list 101 permit tcp host 192.168.30.10 eq 80 10.1.0.0 0.0.255.255 eq 4300

6

Which type of SDM rule is created to govern the traffic that can enter and leave the network based on protocol and port number? NAC rule NATrule IPsec rule access rule

7 Refer to the exhibit. When configuring SSH on a router using SDM from the Configure menu, which two steps are required? (Choose two.) Choose Additional Tasks > Router Access > SSH to generate the RSA keys. Choose Additional Tasks > Router Access > VTY to specify SSH as the input and output protocol. Choose Additional Tasks > Router Properties > Netflow to generatethe RSA keys. Choose Additional Tasks > Router Properties > Logging to specify SSH as the input and output protocol. Choose Additional Tasks > Router Access > AAA to generate the RSA keys. Choose Additional Tasks > Router Access > Management Access to specify SSH as the input and output protocol. 8 Refer to the exhibit. Which two statements are correct regarding the configuration on switch S1?(Choose two.) Port Fa0/5 storm control for broadcasts will be activated if traffic exceeds 80.1 percent of the total bandwidth. Port Fa0/6 storm control for multicasts and broadcasts will be activated if traffic exceeds 2,000,000 packets per second. Port Fa0/6 storm control for multicasts will be activated if traffic exceeds 2,000,000 packets per second. Port Fa0/5 storm control for multicasts will beactivated if traffic exceeds 80.1 percent of the total bandwidth. Port Fa0/5 storm control for broadcasts and multicasts will be activated if traffic exceeds 80.1 percent of 2,000,000 packets per second.

9 Refer to the exhibit. Which three things occur if a user attempts to log in four times within 10 seconds using an incorrect password? (Choose three.) Subsequent virtual login attempts from...