Compuertas Caracteristicas Electricas

www.fairchildsemi.com

MC78XX/LM78XX/MC78XXA

3-Terminal 1A Positive Voltage Regulator
Features
• • • • • Output Current up to 1A Output Voltages of 5, 6, 8, 9, 10, 12, 15, 18, 24V Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area Protection

Description
The MC78XX/LM78XX/MC78XXA series of three terminal positive regulators are available in theTO-220/D-PAK package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be usedwith external components to obtain adjustable voltages and currents.
TO-220

1 D-PAK

1 1. Input 2. GND 3. Output

Internal Block Digram

Rev. 1.0.1
©2001 Fairchild Semiconductor Corporation

MC78XX/LM78XX/MC78XXA

Absolute Maximum Ratings
Parameter Input Voltage (for VO = 5V to 18V) (for VO = 24V) Thermal Resistance Junction-Cases (TO-220) Thermal Resistance Junction-Air (TO-220) OperatingTemperature Range Storage Temperature Range Symbol VI VI RθJC RθJA TOPR TSTG Value 35 40 5 65 0 ~ +125 -65 ~ +150
o

Unit V V C/W
o o oC/W

C C

Electrical Characteristics (MC7805/LM7805)
(Refer to test circuit ,0°C < TJ < 125°C, IO = 500mA, VI = 10V, CI= 0.33µF, CO= 0.1µF, unless otherwise specified) Parameter Symbol TJ =+25 oC Output Voltage VO 5.0mA ≤ Io ≤ 1.0A, PO ≤ 15W VI = 7V to 20V TJ=+25 oC VO= 7V to 25V VI = 8V to 12V IO = 5.0mA to1.5A Load Regulation (Note1) Quiescent Current Quiescent Current Change Output Voltage Drift Output Noise Voltage Ripple Rejection Dropout Voltage Output Resistance Short Circuit Current Peak Current Regload IQ ∆IQ ∆VO/∆T VN RR VDrop rO ISC IPK TJ=+25 oC TJ =+25 oC IO = 5mA to 1.0A VI= 7V to 25V IO= 5mA f = 10Hz to 100KHz, TA=+25 oC f = 120Hz VO = 8V to 18VIO = 1A, TJ =+25 oC f = 1KHz VI = 35V, TA =+25 TJ =+25 C
o oC

Conditions

MC7805/LM7805 Min. 4.8 4.75 62 Typ. 5.0 5.0 4.0 1.6 9 4 5.0 0.03 0.3 -0.8 42 73 2 15 230 2.2 Max. 5.2 5.25 100 50 100 50 8.0 0.5 1.3 -

Unit

V mV

Line Regulation (Note1)

Regline

IO =250mA to 750mA

mV mA mA mV/ oC µV/Vo dB V mΩ mA A

Note: 1. Load and line regulation are specified at constant junction temperature.Changes in Vo due to heating effects must be taken into account separately. Pulse testing with low duty is used.

2

MC78XX/LM78XX/MC78XXA

Electrical Characteristics (MC7806)
(Refer to test circuit ,0°C < TJ < 125°C, IO = 500mA, VI =11V, CI= 0.33µF, CO= 0.1µF, unless otherwise specified) Parameter Symbol TJ =+25 oC Output Voltage VO 5.0mA ≤ IO ≤ 1.0A, PO ≤ 15W VI = 8.0V to 21V TJ =+25 oC TJ =+25 oCTJ =+25 oC IO = 5mA to 1A VI = 8V to 25V IO = 5mA f = 10Hz to 100KHz, TA =+25 oC f = 120Hz VI = 9V to 19V IO = 1A, TJ =+25 oC f = 1KHz VI= 35V, TA TJ =+25 oC =+25 oC VI = 8V to 25V VI = 9V to 13V IO =5mA to 1.5A IO =250mA to750A Conditions MC7806 Min. 5.75 5.7 59 Typ. 6.0 6.0 5 1.5 9 3 5.0 -0.8 45 75 2 19 250 2.2 Max. 6.25 6.3 120 60 120 60 8.0 0.5 1.3 V mV mV mA mA mV/ oC µV/Vo dB V mΩ mA A UnitLine Regulation (Note1) Load Regulation (Note1) Quiescent Current Quiescent Current Change Output Voltage Drift Output Noise Voltage Ripple Rejection Dropout Voltage Output Resistance Short Circuit Current Peak Current

Regline Regload IQ ∆IQ ∆VO/∆T VN RR VDrop rO ISC IPK

Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects mustbe taken into account separately. Pulse testing with low duty is used.

3

MC78XX/LM78XX/MC78XXA

Electrical Characteristics (MC7808)
(Refer to test circuit ,0°C < TJ < 125°C, IO = 500mA, VI =14V, CI= 0.33µF, CO= 0.1µF, unless otherwise specified) Parameter Symbol TJ =+25 oC Output Voltage VO 5.0mA ≤ IO ≤ 1.0A, PO ≤ 15W VI = 10.5V to 23V TJ =+25 oC TJ =+25 oC TJ =+25 oC IO = 5mA to 1.0A VI =...