Electronica

®

BTA/BTB16 and T16 Series
16A TRIACS

SNUBBERLESS™ , LOGIC LEVEL & STANDARD

MAIN FEATURES:
Symbol IT(RMS) VDRM/VRRM IGT (Q1) Value 16 600, 700 and 800 10 to 50 Unit A V
G

A2

A1

A2

mA
A1 A2 G

DESCRIPTION Available either in through-hole or surface-mount packages, the BTA/BTB16 and T16 triac series is suitable for general purpose AC switching. They can be used as anON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits... or for phase control operation in light dimmers, motor speed controllers, ... The snubberless versions (BTA/BTB...W and T16 series) are specially recommended for use on inductive loads, thanks to their high commutation performances. By using an internal ceramic pad, the BTA series providesvoltage insulated tab (rated at 2500V RMS) complying with UL standards (File ref.: E81734). ABSOLUTE MAXIMUM RATINGS
Symbol IT(RMS) RMS on-state current (full sine wave) Parameter

D2PAK (T16-G)
A2

A1 A2 G

A1 A2 G

TO-220AB (BTB16)

TO-220AB Insulated (BTA16)

Value D2²PAK TO-220AB Tc = 100°C Tc = 85°C t = 16.7 ms t = 20 ms 168 160 144 Tj = 125°C Tj = 25°C Tj = 125°C Tj = 125°C 50VDRM/VRRM
+ 100

Unit A

16 A A² s A/µs V A W °C 1/7

TO-220AB Ins. ITSM I ²t dI/dt Non repetitive surge peak on-state current (full cycle, Tj initial = 25°C) I²t Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns F = 60 Hz F = 50 Hz tp = 10 ms F = 120 Hz tp = 10 ms tp = 20 µs

VDSM/VRSM Non repetitive surge peak off-state voltage IGM PG(AV) Tstg Tj Peakgate current Average gate power dissipation Storage junction temperature range Operating junction temperature range

4 1 - 40 to + 150 - 40 to + 125

October 2002 - Ed: 6A

BTA/BTB16 and T16 Series
ELECTRICAL CHARACTERISTICS (Tj = 25°C, unless otherwise specified)
s

SNUBBERLESS™ and LOGIC LEVEL (3 Quadrants)
Symbol Test Conditions Quadrant T16 T1635 IGT (1) VGT VGD IH (2) IL dV/dt (2)VD = 12 V VD = VDRM IT = 500 mA IG = 1.2 IGT VD = 67 % VDRM gate open Tj = 125°C Tj = 125°C Tj = 125°C Tj = 125°C MIN. (dV/dt)c = 10 V/µs Without snubber I - III II MIN. (dI/dt)c (2) (dV/dt)c = 0.1 V/µs RL = 33 Ω RL = 3.3 kΩ Tj = 125°C I - II - III I - II - III I - II - III MAX. MAX. MIN. MAX. MAX. 35 50 60 500 8.5 15 25 30 40 8.5 3.0 35 SW 10 1.3 0.2 35 50 60 500 8.5 50 70 80 1000 14 V/µs A/msBTA/BTB16 CW 35 BW 50 mA V V mA mA Unit

s

STANDARD (4 Quadrants)
Symbol Test Conditions Quadrant BTA/BTB16 C IGT (1) VD = 12 V VGT VGD IH (2) IL dV/dt (2) VD = VDRM IT = 500 mA IG = 1.2 IGT VD = 67 % VDRM gate open Tj = 125°C Tj = 125°C I - III - IV II MIN. MIN. RL = 3.3 kΩ Tj = 125°C RL = 33 Ω I - II - III IV ALL ALL MAX. MAX. MIN. MAX. MAX. 25 40 80 200 5 25 50 1.3 0.2 50 60 120 400 10V/µs V/µs B 50 100 mA V V mA mA Unit

(dV/dt)c (2) (dI/dt)c = 7 A/ms

STATIC CHARACTERISTICS
Symbol VTM (2) Vto (2) Rd (2) IDRM IRRM
Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1

Test Conditions ITM = 22.5 A tp = 380 µs Tj = 25°C Tj = 125°C Tj = 125°C Tj = 25°C Tj = 125°C MAX. MAX. MAX. MAX.

Value 1.55 0.85 25 5 2

Unit V V mΩ µA mAThreshold voltage Dynamic resistance VDRM = VRRM

2/7

BTA/BTB16 and T16 Series
THERMAL RESISTANCES
Symbol Rth(j-c) Junction to case (AC) Parameter D²PAK TO-220AB TO-220AB Insulated Rth(j-a) Junction to ambient S = 1 cm² D²PAK TO-220AB TO-220AB Insulated
S: Copper surface under tab

Value 1.2 2.1 45 60

Unit °C/W

°C/W

PRODUCT SELECTOR
Voltage(xxx) Part Number 600 VBTA/BTB16-xxxB BTA/BTB16-xxxBW BTA/BTB16-xxxC BTA/BTB16-xxxCW BTA/BTB16-xxxSW T1635-xxxG X X X X X X 700 V X X X X X 800 V X X X X X X 50 mA 50 mA 25 mA 35 mA 10 mA 35 mA Standard Snubberless Standard Snubberless Logic level Snubberless TO-220AB TO-220AB TO-220AB TO-220AB TO-220AB D²PAK Sensitivity Type Package

ORDERING INFORMATION

BT A 16 TRIAC SERIES INSULATION: A: insulated B: non insulated...