Hjkhk

When you installing AGP card, please make sure the following notice is fully understood and practiced. If your AGP card has "AGP 4X/8X (1.5V) notch"(show below), please make sure your AGP card is AGP 4X/8X (1.5V).

AGP 4X/8X notch

Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system unable to boot upnormally. Please insert an AGP 4X/8X card. Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode by adjusting the jumper. The factory default for this card is 2X(3.3V). The GA-8IG1000MK (or any AGP 4X/8X only) motherboards might not function properly, if you install this card without switching the jumper to 4X(1.5V)mode in it. Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color", the graphics card manufacturer & some SiS 305 cards, their golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X(3.3V) only. The GA-8IG1000MK (or any AGP 4X/8X only) motherboards might not function properly, If you install this card in it. Note : Although Gigabyte's AG32S(G) graphicscard is based on ATi Rage 128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V) specification. Therefore, AG32S(G) will work fine with Intel® 845(GE/PE) / 845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the informationcontained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

Declaration of Conformity
We, Manufacturer/Importer (full address) G.B.T. TechnologyTräding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-8IG1000MK is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement of radio disturbance characteristics ofindustrial,scientific and medical (ISM high frequency equipment EN 55013 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment EN 55014 Limits and methods of measurement of radio disturbance characteristics of household electrical appliances, portable tools and similar electrical apparatus EN 55015 Limits and methods of measurement ofradio disturbance characteristics of fluorescent lamps and luminaries Immunity from radio interference of broadcast receivers and associated equipment EN 55022 Limits and methods of measurement of radio disturbance characteristics of information technology equipment DIN VDE 0855 part 10 part 12 Cabled distribution systems; Equipment for receiving and/or distribution from sound and televisionsignals EN50091-2 ENV 55104 EN 50082-1 EN 61000-3-3* EN 60555-3 EN 61000-3-2* EN 60555-2 Disturbances in supply systems cause by household appliances and similar electrical equipment “Harmonics” Disturbances in supply systems cause by household appliances and similar electrical equipment “Voltage fluctuations”

EN 50081-1

Generic emission standard Part 1: Residual commercial and light industryGeneric immunity standard Part 1: Residual commercial and light industry

EN 55081-2

Generic emission standard Part 2: Industrial environment

EN 55020

EN 55082-2

Generic emission standard Part 2: Industrial environment

lmmunity requirements for household appliances tools and similar apparatus EMC requirements for uninterruptible power systems (UPS)

CE marking

(EC conformity...