Simple operation for instant communication
The IC-F3003 series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.
Internal VOX capability for hands-free operation
The radiohas the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004 can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Easy to hear in noisy areas
The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even innoisy environments.
* Typical with internal speaker
Selective calling, quiet stand-by and more
2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
Longer operating time
A new high efficiency FET of the IC-F3003series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000mAh battery pack. Even when used with the BP-264, the radio offers 14 hours* of operating time.
*Tx:Rx:Standby=5:5:90. Power save function ON.
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk backfunctions allow you to make a quick response while scanning.
Weather resistant, dust protection, military rugged
While the radio is a compact unit with a height of only 111mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD-810 environmental test. In short, the IC-F3003 series is built rugged!
• DTMF autodial • BIIS PTTID transmission • Low battery alert • PC programmable • Talk around function • Enhanced emergency • Surveillance function • CTCSS/DTCS encoder/decoder • MDC PTT ID and emergency • 2-step power save • Time out timer • Lone worker function • 3-color LED
VHF AND UHF TRANSCEIVERS SPECIFICATIONS
IC-F3003 GENERAL Frequency coverage136–174MHz IC-F4003 350–400MHz 400–470MHz 450–520MHz
BP-263 BP-264 BP-265
Some options may not be available in some countries. Please ask your dealer for details.
Battery packs BP-263 BP-264 BP-265
Number of channels Type of emission Channel spacing PLL channel step Power supply requirement Current drain (approx.) Tx High Rx Max. audio Standby Antenna impedance Operating temperaturerange Dimensions (W×H×D)
(Projections not included) Weight (approx.)
16 channels 16K0F3E/11K0F3E 12.5/25 kHz 2.5/3.125kHz 5/6.25kHz 7.2V DC nominal 1.3A 330mA (Internal SP) 75mA 1.3A 330mA (Internal SP) 70mA
Type and Operating time* capacity (Approx.) AA (LR6) – batteries × 6 Ni-MH, 7.2V 14 hours 1400mAh Li-Ion, 7.4V 20 hours 1900mAh (min.) 2000mAh (typ.)
* Tx: Rx: standby = 5:5:90.Power save function ON.
REGULAR CHARGER For BP-264 (Ni-MH battery)
RAPID CHARGER For BP-264 (Ni-MH battery)
RAPID CHARGER For BP-265 (Li-Ion battery)
50Ω –30°C to +60°C (Radio only) 58×111×31.0 mm (With BP-264) 58×111×35.5 mm (With BP-265) 330g (With BP-264) 270g (With BP-265) 5W, 2W, 1W (Hi, L2, L1) 4W, 2W, 1W (Hi, L2, L1) ±5.0/±2.5kHz (Wide/Narrow) ±2.5ppm 70dB min. 46/40dB typ.(Wide/Narrow) 1.0/1.5% typ. (Wide/Narrow) 3-conductor 2.5 (d) mm (1⁄10ʺ)/2.2kΩ
BC-192 DESKTOP CHARGER + BC-147S*1 AC ADAPTER Charges the BP-264 in 16 hours
BC-191 DESKTOP CHARGER + BC-123S*1 AC ADAPTER Charges the BP-264 in 2 hours
BC-193 DESKTOP CHARGER + BC-123S*1 AC ADAPTER Charges the BP-265 in 2.5...