Inicio y pruebas

Setting Commands of Terminal J6-B
2008-7-11

Re-dial Function
Press “#” key for two seconds to redial the last dialed number.
Operations after Getting into Menu: Search missed calls/received calls/dialed calls, set time and adjust receiver volume.
Input “###**#” to get into menu, if you do not press any key within 30 seconds, the terminal will return back to idle state.
The definitionsof phone keys:
“2”: key
“8”: key
“4”: key, move left, reduce volume. When searching record, press this key to search the system date of the call.
“5” When viewing the call records, press this key to search the call duration.
“6”: key, move right, increase volume.
“*”: key. When setting time or inputting PIN/PUK numbers, press this key to delete input digits; when searchingrecord, press “*” for a long time to delete the current record.
“#”: < OK/SEND > key
Search Serial Number
Input “*#06#”，you can search the IMEI code of the module.
Reset the factory settings
Pick up the handset and input ”###00*#” to initialize the EPROM memorizer.
Delete All Call Records
Pick up the handset and input ”###01*#” to delete all call records, including received calls, dialedcall, missed calls and re-dialed calls.
When the terminal is connected to a billing meter and the billing is not right, you can input the following order to correct it.
###03*#
Set Non-disturb Function
Open the non-disturb function Input “###08*1#”
Close the non-disturb function Input “###08*0#”

Set the Working Frequency
Input ###11*X#
X= 0 850Mhz
X= 1 900Mhz
X= 21800Mhz
X= 3 1900Mhz
X= 4 850/1900Mhz
X= 5 900/1800Mhz
X= 6 900/1900Mhz

After the terminal is connected to power supply, if it can not be connected to network, it will search
the network automatically and fix it.

Check whether the SLIC module works normally or not
Input ###14# and hang up the handset, the extension will ring up one time.

Set Default Network of Making CallsGSM ###18*0#
PSTN ###18*1#

-------------------------------------------------------------------------------------------------------------------
Transfer All: Transfer all incoming calls to appointed phone number.
###30*appointed phone number#

Cancel Transfer All
###30*#

Busy Transfer
###31*appointed phone number#

Cancel Busy Transfer
###31*#

No Reply Transfer###32*appointed phone number#
Cancel No Reply Transfer
###32*#

Not Reachable Transfer
###33*appointed phone number#
Cancel Not Reachable Transfer
###33*#

Cancel All Transfers
###36*#

Set Call Waiting
Set ###40*1#
Cancel ###40*0#

Input PIN Code When Turning On
When the LCD of the terminal shows “PIN ” druing turn on, user can input the PIN code of the SIM card andpress “#” key to confirm it.
Input PUK Code When Turning On
When the LCD of the terminal shows “PUK ” druing turn on, user can input the PUK code of the SIM card and press “#” key to confirm it.

IP Rules (Set 12 groups at most)
A. Delete all IP rules
###80*#
B) Add IP rule
###80*Id*IpHead*IpNum*CutByte#
Id which groups of the IP groups fixed as two digitsIpHead the head numbers before phone number, 12 digits at most, range 0~12
IpNum the phone number, 12 digits at most, range 0~12
CutByte how many digits the user want to cut off, fixed as one digit
For example, ###80*01*013*17951*1#, means the first group IP rule. After setting, when user make calls that head numbers is “013”, it will cut the “0” and add“17951” to dial the number automatically, so the real dialed number is “1795113….”.

Barring Call Numbers (set 12 groups at most)
A. Delete all barring calls
###81*#
B. Add barring calls
###81*Id*BarrredNum#
Id which groups of the barring calls
BarredNum the barring call number, 16 digits at most.

Whether to Show the IP numbers or Not
A） Show the IP...