Manual De Expandidor De Rango Linksys

®

A Division of Cisco Systems, Inc.

2.4 GHz Wireless-G
802.11g

Range Expander
WIRELESS

Model No.

WRE54G

User Guide

Wireless-G Range Expander

Copyright and Trademarks
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco
Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005Cisco Systems, Inc. All
rights reserved. Other brands and product names are trademarks or registered trademarks of their respective
holders.
WARNING: This product contains chemicals, including lead, known
to the State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.

How to Use this User Guide
The user guide to the Wireless-G RangeExpander has been designed to make understanding networking with the
Range Expander easier than ever. Look for the following items when reading this User Guide:
This checkmark means there is a note of interest and
is something you should pay special attention to while
using the Range Expander.
This exclamation point means there is a caution or
warning and is something that could damage yourproperty or the Range Expander.
This question mark provides you with a reminder about
something you might need to do while using the Range Expander.
In addition to these symbols, there are definitions for technical terms that are presented like this:
word: definition.
Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like
this:
Figure0-1: Sample Figure Description

Figure numbers and descriptions can also be found in the “List of Figures” section.
WRE54G_V2-UG-50114NC JL

Wireless-G Range Expander

Table of Contents
Chapter 1: Introduction
Welcome
What’s in this User Guide?

Chapter 2: Planning Your Wireless Network
Network Topology
Roaming
Network Layout

Chapter 3: Getting to Know the Wireless-G Range ExpanderThe Front Panel
The Side Panel
The Recess for the Power Plate

Chapter 4: Connecting the Wireless-G Range Expander
Overview
Connection to a Wired Network for Setup
Connection to a Wireless Network for Setup
Connection for Auto Configuration

Chapter 5: Setting Up the Wireless-G Range Expander
Overview
Running the Setup Wizard
Moving the Range Expander

Chapter 6: Configuring theWireless-G Range Expander
Overview
Accessing the Web-based Utility
The Setup Tab

Appendix A: Troubleshooting
Common Problems and Solutions
Frequently Asked Questions

Appendix B: Wireless Security
Security Precautions
Security Threats Facing Wireless Networks

Appendix C: Upgrading Firmware

1
1
2

4
4
4
5

6
6
6
7

8
8
8
9
9

10
10
10
16

17
17
17
1823
23
23

27
27
27

30

Wireless-G Range Expander

Appendix D: Windows Help
Appendix E: Glossary
Appendix F: Specifications
Appendix G: Warranty Information
Appendix H: Regulatory Information
Appendix I: Contact Information

31
32
36
37
38
40

Wireless-G Range Expander

List of Figures
Figure 3-1: Front Panel
Figure 3-1: Front Panel with Ethernet Network CableConnected
Figure 3-2: Recess for the Power Plate
Figure 4-1: Connecting the Ethernet Network Cable
Figure 4-2: Using the Power Plate with Cord
Figure 4-3: Using the Power Plate with Plug
Figure 4-4: Using the Power Plate with Cord
Figure 4-5: Using the Power Plate with Plug
Figure 5-1: Setup Wizard’s Welcome Screen
Figure 5-2: Check Your Wireless Network
Figure 5-3: Confirm Wireless NetworkSettings
Figure 5-4: Wireless Network Not Found
Figure 5-5: Choose the Access Point
Figure 5-6: Configure Wireless Settings Manually
Figure 5-7: WEP Security Settings
Figure 5-8: WPA Security Settings
Figure 5-9: Choose the Range Expander
Figure 5-10: Enter the Password
Figure 5-11: Configure Network Address Settings
Figure 5-12: MAC Address of Access Point or Wireless Router
(WRE54G v1...